Xerox WorkCentre C226 Hızlı Başlangıç Kılavuzu - Sayfa 7
Yazıcı Xerox WorkCentre C226 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Xerox WorkCentre C226 29 sayfaları. Xerox workcentre c226: quick start
Ayrıca Xerox WorkCentre C226 için: Hızlı Bağlantı Kılavuzu (18 sayfalar)
Sayfayı Yazdır
Main Screen of Copy Mode
1
4
Item
1. Message display
2.
[Interrupt] key display
area
Copy quantity display Displays the selected number of copies before the [Start] key is pressed
3.
4.
Reduce/Enlarge
display
5.
Image Quality tab
6.
Paper Supply display Use to select the paper size. The display shows the location of the
7.
Original tab
8.
2 Sided Copy display Use to select the duplex copy mode setting.
9.
Adjustments tab
Copy Output display Use to select Collated, Stapled, and Uncollated.
10.
Xerox WorkCentre C226 Quick Start Guide
5
6
7
Basic status messages are displayed here.
When interrupt copy is available, the [Interrupt] key is displayed here.
When an interrupt copy job is being run, a [Cancel] key is displayed
here to be used for cancelling the interrupt copy job.
or the number of remaining copies after the [Start] key is pressed.
Use to select the copy ratio.
Touch to adjust the image quality.
paper trays, the size of the paper in the trays and the approximate
amount of paper loaded in each tray (indicated by
Touch this tab to manually enter the original size.
Touch to display the Adjustments screen.
2
3
8
9
10
Description
).
Page 9