Xerox WORKCENTRE C2424 Kullanıcı Kılavuzu - Sayfa 33

Yazıcı Xerox WORKCENTRE C2424 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Xerox WORKCENTRE C2424 43 sayfaları. Copier-printer
Ayrıca Xerox WORKCENTRE C2424 için: Hızlı Referans Kılavuzu (14 sayfalar), Broşür (8 sayfalar), Tamamlayıcı Kılavuz (7 sayfalar), Teknik Özellikler (6 sayfalar), Başlangıç Kılavuzu (26 sayfalar), Kullanıcı Kılavuzu (21 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Bakım Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (19 sayfalar), Talimatlar Kılavuzu (16 sayfalar), Manuel (12 sayfalar), Talimatlar Kılavuzu (6 sayfalar), Kurulum Kılavuzu (4 sayfalar), Kurulum Kılavuzu (2 sayfalar), Besleme Silindiri Kitinin Değiştirilmesi (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Gönüllü Ürün Erişilebilirlik Şablonu (10 sayfalar), Rekabetçi Karşılaştırma (3 sayfalar), Hızlı Referans Kılavuzu (14 sayfalar), Servis Kılavuzu (11 sayfalar), Hızlı Referans Kılavuzu (13 sayfalar)

Creating an AppSocket System with LaserWriter 8.6

Xerox provides Macintosh AppSocket printing with PhaserPort for Mac OS on the

WorkCentre C2424 Software CD-ROM. PhaserPort for Mac OS provides a bi-directional,

high-speed communications channel using the new plug-in communication architecture of

Apple LaserWriter version 8.6.

AppSocket provides feedback about print job status which is not available through LPR.

PhaserPort for Mac OS System Requirements

Note

PhaserPort is not supported by Mac OS X.

System requirements include:

■

A system installed on a TCP/IP network

PowerPC-based Macintosh

■

Apple's LaserWriter version 8.6 or later, with Desktop Printing enabled

■

Open Transport version 1.1 or later networking. TCP/IP networking provided by MacTCP

software is not supported. The Macintosh must be properly configured to communicate

with the system.

Creating a Desktop System with PhaserPort for Mac OS

Launch the PhaserPort Printer Tool.

Enter the system's IP address or DNS name in the Printer Internet Address field.

Enter a name for the desktop system in the Desktop Printer Name field.

Click Verify to contact the system over the TCP/IP network, then verify its network

configuration.

Click Create to create the desktop system.

Click Quit to exit the PhaserPort Printer Tool.

In the Finder, click the newly created desktop system icon.

Click Change Setup in the Finder's Printing menu.

Select the PostScript Printer Description file and provide configuration information.

You can also select the Auto Setup button, then Macintosh automatically attempts to

determine the correct settings for the system.

Note

Certain utilities, such as Adobe Font Downloader, are not compatible with PhaserPort for

Mac OS software because they attempt to directly communicate with the system using the

AppleTalk protocol. If you use Mac OS software, create an AppleTalk desktop system,

then delete this system after running and exiting the non-compatible software.

WorkCentre® C2424 Copier-Printer

6-33

Macintosh