Direct lighting Popper! 6X Hızlı Kılavuz - Sayfa 2

Aydınlatma Ekipmanları Direct lighting Popper! 6X için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. Direct lighting Popper! 6X 3 sayfaları.

7 Momentarily press the "POP" buttons to ﬂash the strobes.

RECORD/PLAYBACK FUNCTIONS

To ready the Popper 6X for recording, Press the "Record" button once. The record button

will light solid.

To begin recording, press the "Record" button again. The "Record" button will blink to

indicate that recording is in progress.

Press any sequence of ﬂash buttons, at the desired timing, and a sequence will be

recorded.

To end a recording, Press the "Record" button a 3rd time. The button will go dark to

indicate that it is no longer recording.

To playback, simply press the "Play" button. The entire recorded sequence will be played

back. Pressing the "Pause" button once will suspend playback, and pressing it again will

resume, where it left off. Pressing the "reset" button will reset playback to the beginning of

the sequence.

Pressing the 'Loop" during playback will continue to loop the sequence endlessly, until

either the "Pause" or "Loop" button is pressed again.

The sequence recorded in memory will remain in memory until it is erased, when a new

sequence is recorded, even after a power down or battery change.

Notes

You may daisy chain as many strobe units as you like off of any or all output connectors.

Dataﬂash AF 1000 units will "safety timeout" if they ﬂash continuously over a short period

of time. The yellow LED indicator in the Dataﬂash AF1000 head will blink to indicte the

timeout. When this happens, the system will cool down and reset its self in 2 minutes.

The duration value (00-99) indicates a true time, in 120ths of a second. A Duration value

of 00 will indicate a ﬂash of 1 120th of a second in duration. A Duration value of 01 will

indicate a ﬂash of 2 120ths of a second. etc. A duration value of 04 indicates a ﬂash of

1/24th of a second, and represents the shortest ﬂash which will reliably expose

consistently at 24 fps. We recommend beginning testing with a Duration value around 12.

To replace 3 AAA batteries inside the unit, unscrew the 4 phillips bolts holding the end

panel in place.