Xerox WORKCENTRE C2424 Kullanıcı Kılavuzu - Sayfa 9

Yazıcı Xerox WORKCENTRE C2424 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Xerox WORKCENTRE C2424 19 sayfaları. Copier-printer
Ayrıca Xerox WORKCENTRE C2424 için: Hızlı Referans Kılavuzu (14 sayfalar), Broşür (8 sayfalar), Tamamlayıcı Kılavuz (7 sayfalar), Teknik Özellikler (6 sayfalar), Kullanıcı Kılavuzu (43 sayfalar), Başlangıç Kılavuzu (26 sayfalar), Kullanıcı Kılavuzu (21 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Bakım Kılavuzu (20 sayfalar), Talimatlar Kılavuzu (16 sayfalar), Manuel (12 sayfalar), Talimatlar Kılavuzu (6 sayfalar), Kurulum Kılavuzu (4 sayfalar), Kurulum Kılavuzu (2 sayfalar), Besleme Silindiri Kitinin Değiştirilmesi (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Gönüllü Ürün Erişilebilirlik Şablonu (10 sayfalar), Rekabetçi Karşılaştırma (3 sayfalar), Hızlı Referans Kılavuzu (14 sayfalar), Servis Kılavuzu (11 sayfalar), Hızlı Referans Kılavuzu (13 sayfalar)

Sayfayı Yazdır
Xerox WORKCENTRE C2424 Kullanıcı Kılavuzu
3.
Select one of the following, then press the Enter button:
■
100%
– Keeps the copy image the same size as the original. (Factory default value).
■
Auto
– Reduces or enlarges the image as needed to fit the full size of the copy paper.
Preset
■
– Reduces or enlarges the image as needed to fit a selected copy paper size.
25%-400%
■
– Reduces or enlarges the image by a selected percentage.
Poster 4x4
– Enlarges the image to fit onto 16 copy pages so that it can be assembled
■
into a 4x4 poster.
4.
If you selected Preset, select the preset value, the size of the original followed by the size
of the copy paper.
5.
If you selected 25%-400%, use the keypad to enter a value from
increments) or press the Up Arrow or Down Arrow button to scroll to the desired value,
then press the Enter button.

Lightening or Darkening the Image

To lighten or darken the image when it is copied:
1.
On the control panel, press the Copy button.
2.
In the menu, select Lighten/Darken, then press the Enter button.
Note
You can press the Lighten/Darken shortcut button on the control panel to skip Steps 1
and 2.
3.
Press the Up Arrow or Down Arrow button to scroll to a whole number from
Darkest (+3)
to
Lightest

Adjusting the Contrast of the Image

To reduce or increase the contrast of the image when it is copied:
1.
On the control panel, press the Copy button.
2.
In the menu, select Contrast, then press the Enter button.
3.
Press the Up Arrow or Down Arrow button to scroll to a whole number from
Highest (+3)
to
Lowest

Automatically Suppressing Background Variations

Sometimes, two-sided originals on thin paper show some of the text or images from the back
side of the paper. To improve your copies from this type of original, use the
Suppression
setting to minimize the sensitivity of the scanner to variations in light
background colors.
To change this setting:
1.
On the control panel, press the Copy button.
2.
In the menu, select
Auto
3.
On
or Off, then press the Enter button. The factory default is Off.
Select either
(-3), then press the Enter button.
(-3), then press the Enter button. The factory default is 0.
Suppression, then press the Enter button.
WorkCentre® C2424 Copier-Printer
3-9
Adjusting Copying Options
25%
to
400%
(in 1%
Auto