Xerox 4150S - WorkCentre B/W Laser Başlangıç Kılavuzu - Sayfa 15

Hepsi Bir Arada Yazıcı Xerox 4150S - WorkCentre B/W Laser için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Xerox 4150S - WorkCentre B/W Laser 38 sayfaları. Finisher installation guide
Ayrıca Xerox 4150S - WorkCentre B/W Laser için: Broşür ve Teknik Özellikler (4 sayfalar), Hızlı Referans (1 sayfalar), Kartuşların Değiştirilmesi (1 sayfalar), Kurulum Talimatları Kılavuzu (40 sayfalar), Modül Kurulum Kılavuzu (1 sayfalar), Donanım Kurulum Kılavuzu (1 sayfalar), Tepsi Modülü Kurulum Kılavuzu (1 sayfalar), Modül Kurulum Kılavuzu (1 sayfalar), Kurulum Kılavuzu (6 sayfalar)

Install Print Drivers

This procedure describes how to install Print Drivers using the Print Driver CD.

NOTE:

If you wish to install different print drivers or are using a different operating system

refer to the System Administration CD for full details.

The Print Drivers are on the Print Driver CD that was delivered with your WorkCentre.

You can use the CentreWare Print and Fax Drivers CD to install multiple components such

as printer drivers, user documentation and PPDs (PostScript

same time. To use the installer, load the CentreWare Print and Fax Drivers CD-ROM

delivered with your WorkCentre.

NOTE:

CentreWare is a group of applications, internet services and printer drivers which

provide assistance to customers configuring and installing the device.

At the client workstation insert the Driver CD into the CD drive.

If the CD does not start automatically, go to the Start menu, select Run and browse to the

CD drive. Select Setup and click OK. Click OK to start the installation procedure.

Select the language for the installation and select Continue. The driver screen is

displayed.

Select Install Drivers.

Select Install Print Drivers.

NOTE:

The Adobe

To install the PCL 5 or PCL 6 Print Drivers, select Option and check the boxes for the

drivers required.

Enter the Printer's IP address, DNS name or UNC path for the WorkCentre.

Select Install.

Follow the on screen messages to complete the installation.

When the Print Driver is successfully installed, either send a test print from the print driver

or submit a job to the WorkCentre.

If the printing operation is successful, continue on to the next setup procedure in this

document. If the print operation failed, refer to Troubleshooting on page 31.

For a full explanation refer to the System Administration CD that accompanied your

WorkCentre.

getting started guide

PostScript

3 ™ Driver is installed by default.

Printer Description) at the