Xerox 4595 Müşteri Beklenti Belgesi - Sayfa 19

Hepsi Bir Arada Yazıcı Xerox 4595 için çevrimiçi göz atın veya pdf Müşteri Beklenti Belgesi indirin. Xerox 4595 33 sayfaları. Copier/ printer with copy-server and controller
Ayrıca Xerox 4595 için: Operatörler İçin El Kitabı (1 sayfalar), Giriş (4 sayfalar), Hızlı Referans Kılavuzu (6 sayfalar), Hızlı Referans Kılavuzu (4 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar)

Space requirements

The following illustration shows the space requirements and service space envelope with the

optional Finisher/Folder and HCF installed. For other configurations, consult the Module

Dimensions chart.

The illustration below shows the space requirements and service space envelope for the printer

system with the Finisher/Folder and HCF installed. If there is no HCF attached, then the Multi-

Sheet Inserter, in the closed position (3.3 in/83 mm), needs to be figured in.

The optional FreeFlow DocuSP Print Server Stand is not shown.

NOTE 1: The dimensions shown are absolute minimums.

NOTE 2: There should be a 78 in. (1981 mm) minimum height clearance in service envelope.

NOTE 3: Location of left rear corner of main processor should be marked with tape for delivery

personnel.

NOTE 4: If there is no HCF attached, then the Multi-Sheet Inserter, in the closed position (3.3"/83

mm), must be calculated in the space requirements.

The following illustration shows the space requirements and service space envelope with the

optional Finisher/Folder, optional FreeFlow Print Server, and optional HCF installed. For other

configurations, consult the Module Dimensions chart.

NOTE 1: The dimensions shown are absolute minimums.

NOTE 2: 78" (1981 mm) minimum height clearance in service envelope.

NOTE 3: Location of left rear corner of main processor should be marked with tape for delivery

personnel. (See diagram above)

NOTE 4: If there is no HCF or OHCF attached, then the Multi-Sheet Inserter, in the closed

position (3.3"/83 mm), must be calculated in the space requirements.