Xerox 4890 Advanced Hızlı Referans Kartı - Sayfa 2
Hepsi Bir Arada Yazıcı Xerox 4890 Advanced için çevrimiçi göz atın veya pdf Hızlı Referans Kartı indirin. Xerox 4890 Advanced 2 sayfaları. Highlight color laser printing system
Ayrıca Xerox 4890 Advanced için: Hızlı Referans Kartı (2 sayfalar), Hızlı Referans Kartı (2 sayfalar), Renk Kılavuzu (32 sayfalar), Kullanıcı Kılavuzu (2 sayfalar)
Sayfayı Yazdır
Special considerations
•
Color toner detection by Optical Character Recognition (OCR)
scanners is wavelength dependent.
•
Appearance of a very small, white transition region between solid
color and solid black images is common to tri-level xerographic
printing.
•
Transference of the black toner to poly-vinyl surfaces is a
common occurrence; color toner does not transfer.
•
Print quality is guaranteed to a range of three to four millimeters
for edge marking and six millimeters for text printing to the edge
of the page.
•
Xerox carbonless paper is approved for DocuPrint 4890/92C only.
Refer to the Xerox Supplies Catalog for the reorder numbers.
•
Appearance of very small spots is a common occurrence on all
xerographic printers. Consult your Xerox service representative
for details on acceptable spot occurrence specifications.
Environmental requirements
•
Operating temperature:
o
o
o
– Recommended: 72
+/- 4
F (22
+/- 2
o
o
o
– Min./Max.: 60
to 80
F (15.5
to 26.7
•
Humidity:
– Recommended: 45% +/- 10% RH
– Min./Max.: 30% to 65% RH
•
Heat Dissipation (System Control Module): Max. 1,100 BTU/hour
•
Heat Dissipation (Printer Module):
– Standby mode (50/60 Hz): Max 9,100 BTU/hour
– Operating mode (50/60 Hz): Max 14,980 BTU/hour
Electrical requirements
•
System Control Module/HCU or PCI board (60 Hz):
– 115 or 220 VAC
– 15 amp service (for 115 VAC, NEMA 5-15R or
ANSI C73, 11R)
– 0.8 KVA rating
•
System Control Module/HCU or PCI board (50 Hz):
– 100-240 VAC +/- 10%
– 15 amp service
(power connection per local codes/regulations)
– 0.8 KVA rating
•
Printer Module (60 Hz):
– 120/208 or 120/240 VAC
– 30 amp service (NEMA 14-30R)
– 5.5 KVA rating (Operating mode)
•
Printer Module (50 Hz):
– 220, 230, 240 VAC
– 30 amp service
(power connection per local codes/regulations)
– 5.5 KVA rating (Operating mode)
Supplies
Xerox Color
Dry Ink, Black
Dry Ink, Red
Dry Ink, Blue
Dry Ink, Green
Dry Ink, Cyan
Dry Ink, Magenta 6R816
Dry Ink, Royal
Dry Ink, Cardinal
o
C)
Dry Ink, Violet
o
C)
Dry Ink, Ruby
Dry Ink, Brown
Fuser Lubricant
Stitcher Wire
Notes:
•
Expected dry ink yield is based on a 5% black and 1.5% color
area coverage. This yield will vary depending on area coverage of
the application and darkness settings of the printer.
•
Use only dry ink that is specified for use in the DocuPrint 4850/
4890/92C printer even when printing non-colored jobs.
•
Purchase of colored dry ink is required to operate your DocuPrint
4850/4890/92C NPS/IPS highlight color system.
A small amount of colored dry ink is consumed even when
printing non-colored jobs, except in the Black Executive mode.
For further information on this topic, consult your local Xerox
service representative.
Reference material
•
Refer to the Helpful Facts About Paper to help in selection of
preprinted forms, perforated stock and labels.
•
Refer to the Highlight Color in Business Documents -- a Practical
Guide for information on how to leverage the business benefits of
HLC documents.
2002 by Xerox Corporation. All rights reserved.
Expected
Yield
Reorder
Reorder
Cartridges
(Prints/
# (US)
# (XE)
per Carton
Carton)
6R296
6R90193
6
180,000
6R297
6R90194
3
270,000
6R754
6R90225
3
270,000
6R299
6R90196
3
270,000
6R755
6R90226
3
270,000
6R90227
3
270,000
6R826
6R90232
3
270,000
6R825
6R90231
3
270,000
6R828
6R90243
3
270,000
6R827
6R90242
3
270,000
6R842
6R90245
3
270,000
8R983
8R983
2 Tubes
240,000
8R1174
8R1174
1 Reel
32,000
Staples
XEROX
Xerox DocuPrint
4850/4890/92C NPS/IPS
Customer Information
Quick Reference Card
The Xerox DocuPrint 4850/4890/92C NPS/IPS is a highlight
color printing system.
October 2002
721P90000