Xerox CopyCentre 245 Tamamlayıcı Kılavuz - Sayfa 14
Hepsi Bir Arada Yazıcı Xerox CopyCentre 245 için çevrimiçi göz atın veya pdf Tamamlayıcı Kılavuz indirin. Xerox CopyCentre 245 20 sayfaları. Xerox multifunction printers detailed specifications
Ayrıca Xerox CopyCentre 245 için: Referans Kılavuzu (27 sayfalar), Şartname (21 sayfalar), Değerlendirici El Kitabı (27 sayfalar)
Sayfayı Yazdır
4
Copying using Build Job
Build Job allows the document to be broken into several segments and copied
segment by segment with different settings applied to each segment. This section
describes how to copy an original document containing printed tab dividers.
Note:
Load the tab stock into the paper trays
Load the tab stock into either the Bypass Tray, Tray 1 or Tray 2 as described in Section
2, Setup on page 3.
Program Build Job
The job must be divided into segments. Each divider will be a segment and each part
of the body of the document between the dividers will be a segment.
1
Input the number of sets you require.
2
Select the Job Assembly tab.
3
Select Sample Set, select On
and Save. This will enable you
to print one sample set to
ensure that you have
programmed the job correctly.
4
From the Job Assembly screen
select Build Job.
12
Xerox CopyCentre, WorkCentre, WorkCentre Pro 232/238/245/255/265/275 Tab Supplement
The original printed tab dividers MUST be copied from the document glass
while the body of the original can be copied using the document handler.