Xerox WorkCentre Pro 65 Sistem Yönetimi Kılavuzu - Sayfa 28

Hepsi Bir Arada Yazıcı Xerox WorkCentre Pro 65 için çevrimiçi göz atın veya pdf Sistem Yönetimi Kılavuzu indirin. Xerox WorkCentre Pro 65 30 sayfaları. Pdl reference guide
Ayrıca Xerox WorkCentre Pro 65 için: Hızlı Başlangıç Kılavuzu (16 sayfalar), Kullanıcı Kılavuzu (24 sayfalar), Ağ Kurulum Kılavuzu (42 sayfalar), Referans Kılavuzu (22 sayfalar)

Sayfayı Yazdır

Xerox WorkCentre Pro 65 Sistem Yönetimi Kılavuzu

Page 1 - 16

Following completion of the On Demand Overwrite the

Network Controller will reboot. A confirmation sheet will print.

To verify the overwrite has completed view the Confirmation

Sheet, under Confirmation Details. The Job Information:

Status ESS Disk should read 'SUCCESS'. The Status Image

Disk should read 'SUCCESS'.

On Demand Overwrite from a workstation...

1. Launch an Internet Browser.

2. Enter the TCP/IP Address of your WorkCentre Pro in the

Address or Location field and press Enter.

3. At the CentreWare Internet Services Home Page, Click

the Properties tab or click Properties in the directory

tree.

4. Click Disk Overwrite in the directory tree.

5. Enter the administration id and password.

6. Click OK.

7. Click Start.

NOTE: A screen will appear to confirm that this procedure will

delete image data from the hard disks. Any existing jobs in the

queue will be deleted and overwritten. The machine will be

taken offline and will be unable to receive any incoming jobs.

Internet Services will not be available until the machine

reboots and comes back online.

The On Demand Overwrite will overwrite all image data on the

hard disks. The process takes up to 20 minutes.

To cancel the overwrite procedure press Abort. Enter the

current administrator password. The overwrite procedure

may have already started at this stage. Press Back to

continue with the overwrite.