Xerox 3030 Teknik Özellikler - Sayfa 2
Fotokopi Makinesi Xerox 3030 için çevrimiçi göz atın veya pdf Teknik Özellikler indirin. Xerox 3030 2 sayfaları. Engineering copier
Sayfayı Yazdır
DOCUMENT INPUT
Maximum size
36" x 20' long in single copy mode;
36" x 60" long multicopy mode
Minimum size
8 1/2" x 11" (portrait)
Types
Opaque, translucent and transparent
documents
Note
A document carrier (8R3628) is
recommended for damaged or very delicate
documents
Thickness
Up to 1/8" thick
PRODUCTIVITY
Warm-up time
Less than 3 minutes from a cold start
First Copy
Less than 20 seconds D size (24" x 36")
Out Time (FCOT)
Copy throughput
2 E size (36" x 48") per minute;
(multiple copy mode)
4 D size (24" x 36") per minute;
6 C size (18" x 24") per minute
Multiple copies
Selectable, 1-15 copies per document
MEDIA
Type
20 lb. xerographic bond, 20 lb. xerographic
Zero Solvent vellum and .004 drafting film
Supply
Roll stock selectable from one on-line feed
roll; either 36" x 500' bond or vellum or
36" x 150' .004 drafting film
Manual bypass for special media applications
POWER REQUIREMENTS
115 VAC/20 amp dedicated line
PHYSICAL CHARACTERISTICS
Product size
Height 46.25"; Width 57"; Depth 27"; Weight
500 lbs.
Installation space
105" x 87"
KEY FEATURES
• Interactive dual-language message display communicates the status
of the copier and display instructions for operation and maintenance.
All of these choices are yours. From Xerox Engineering Systems.
Only Xerox Engineering Systems brings you the power of the Xerox
3000 family of wide-format copiers. The Xerox 3000 engineering copiers
offer the right combination of features, value, and productivity for
engineering reprographics. Our products continue to be the industry
benchmark for reliability, ease of use, and quality copies.
Xerox®, Auditron®, 3030, the digital box icon
and the acronym XES are trademarks of Xerox
Corporation. ©XESystems, Inc. 2000. 08/00
Printed on recycled paper. 610P62002
XEROX 3030 ENGINEERING COPIER
• On-board electronic Auditron with capacity for 250 individual
accounts in three modes: access control, assigned account,
copy inhibit.
• Partial copy enables users to reproduce only the data they need for
a particular task. Only the portion containing the required data will
be reproduced which will reduce the time and expense for
reproduction.
• In the "Sets" mode, prints are delivered in sequence to the copy
stacker conveniently located in front of the 3030, all ready to either
bind or staple.
ACCESSORIES
Data Shuttle (requires shuttle installation kit); Work Organizer; Long
Document Guide; Portable Data Printer; Document Stacker
Agency approvals: UL and CSA
XES offers a broad array of media, toner and consumables designed
to work with all brands of wide format equipment.
Product data subject to change without notice.
Come visit us on the World Wide Web
www.XES.com
Your nearest XES authorized reseller is:
Work Organizer (optional).
Convenient storage tray for
copies enhances operator
efficiency; provides easier
handling of prints.