Xerox CopyCentre C75 Kullanıcı Kılavuzu - Sayfa 8

Fotokopi Makinesi Xerox CopyCentre C75 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Xerox CopyCentre C75 24 sayfaları. Copycentre / workcentre pro auditron report software
Ayrıca Xerox CopyCentre C75 için: Hızlı Başlangıç Kılavuzu (16 sayfalar)

Sayfayı Yazdır

Collecting Data via Serial Cable

To collect data locally, you will need: a 9-pin serial throughput cable and a valid User Number.

1. Locate and open the 3-inch by 3-inch cover at the left rear of the Document Glass cover to

expose two connectors – the smaller one is the 9-pin serial connector.

2. Connect a 9-pin serial throughput cable between the serial connector on the machine and the

PC. This cable will have rectangular connectors on both ends.

3. Select Start, then Programs, and Auditron Report Software to open the Connection

Selection window.

4. In the Connection Selection window, select Local.

If this is the first time this program has been used, the Connection Selection window will

display the default assignments for Local Setup and Remote Setup. Check that the Local

Setup assignment is correct for your computer. Refer to Setup Tips at the end of this

document to determine the port used by your computer's spare serial connection.

5. Select OK. The PC window will briefly display the configuration of the CopyCentre

C65/C75/C90 WorkCentre Pro 65/75/90 in the Connection Manager window. Select Close

if the Connection Manager screen has not been set to close automatically. If you want the

screen to automatically close, check the Auto Close box.

If the PC is not connected to the CopyCentre C65/C75/C90 WorkCentre Pro 65/75/90 at this

time, a window will briefly appear with a message to check the connection. The software

will continually attempt to establish communications. If a successful connection has not

been made within five minutes, the software will cease trying and will leave a window with a

request to Core Functionality not detected, please try again.