Xerox DC240 - DocuColor 240 Color Laser Yayın Notu - Sayfa 4
Fotokopi Makinesi Xerox DC240 - DocuColor 240 Color Laser için çevrimiçi göz atın veya pdf Yayın Notu indirin. Xerox DC240 - DocuColor 240 Color Laser 34 sayfaları. Overview of the control panel buttons.
Ayrıca Xerox DC240 - DocuColor 240 Color Laser için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Donanım Değiştirme Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
LDAP Server Setup
If you enable an LDAP server (in More Setup), you must also meet the following
requirements:
• Make sure the LDAP server IP address and host name are registered on the DNS server
and that DNS Setup is enabled on the Fiery. To enable DNS Setup, select Enable DNS
Setup in the Protocol2 tab under Network Setup.
• You must enable the Fiery e-mail service (on the Service3 tab under Network Setup) to
allow LDAP to access corporate e-mail addresses from Remote Scan.
• In a Windows Server 2003 Active Directory DNS environment, add the Fiery to the
Windows Active Directory Domain. Otherwise, the LDAP feature might not be able
to resolve the LDAP Server name. The Windows domain setting is on Service 2 tab of
Network Setup.
• Make sure the time difference between the LDAP server and the System Time of the Fiery
is 5 minutes or less. You can set the time on the Fiery using WebSetup.
WebSetup on Mac OS X
To use WebTools on Mac OS X, set the display resolution to 1280
Otherwise, some options in WebSetup may be hidden.
Job Log Setup
You must enable both Auto Print Job Log After 55 Jobs and Auto Clear Job Log After 55 Jobs
for those features to function properly. Disabling either one of them results in both features
not functioning.
Error History Report
The Error History Report shows the error "027-741 Job Template Server Connect Fail" each
time the Fiery is rebooted. This message is triggered as part of the normal start-up sequence
and does not indicate an error condition.
Member Printing
If Member Printing is enabled, you cannot download files from Downloader,
WebDownloader, or Command WorkStation. If Member Printing is enabled, do one of
the following:
• Print directly from the application in which the file was created.
• Download the file to the Hold queue, change the owner information for the job with
Command WorkStation, and send the job to print.
Printing Groups
WebSetup allows you only to enable or disable the use of Printing Groups. To define the
actual groups, use Command WorkStation.
Page 4
x
1040 or higher.
Part Number: 45045321