Xerox DocuColor 3535 Hızlı Başlangıç Kılavuzu - Sayfa 6
Fotokopi Makinesi Xerox DocuColor 3535 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Xerox DocuColor 3535 12 sayfaları. Fiery network controller
Ayrıca Xerox DocuColor 3535 için: Hızlı Başlangıç Kılavuzu (4 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
6 Quick Start Guide
UNIX (TCP/IP) workstation
IPX (Novell) network
Other Network Requirements
• Standard TCP/IP connectivity (for example, Sun SPARCStation or Silicon Graphics
workstation with Solaris version 2.6 or later or SunOS version 4.1.x software or RedHat
Linux version 7.2)
• TCP/IP printing software that conforms to RFC1179 (Berkeley lpd protocol)
• Novell server
• Novell NetWare software version 4.x or 5.x
• NDPS gateway in Netware 5.x
• Support for Ethernet SNAP, Ethernet II, Ethernet 802.3, and Ethernet 802.2 frame types
Preparing to print
To set up your Fiery, you must perform the following tasks:
• Connect the Fiery physically to a functioning network.
• Configure the network server.
• Set up the Fiery from the Copier Control Panel and from Command WorkStation
or WebSetup.
• Prepare client workstations for printing.
A brief explanation of each task follows.
Connecting the Fiery to a functioning network
When you add the Fiery to a network, it is assumed that a network
N
:
OTE
administrator has already installed a network cabling system and has connected
workstations and servers. For examples of different networks, see the
Guide.
Configuration