Xerox DocuColor 40 Ayarlar Kılavuzu - Sayfa 4

Fotokopi Makinesi Xerox DocuColor 40 için çevrimiçi göz atın veya pdf Ayarlar Kılavuzu indirin. Xerox DocuColor 40 8 sayfaları. High speed paper-backed transparencies
Ayrıca Xerox DocuColor 40 için: Manuel Kullanım (12 sayfalar), Referans Kılavuzu (13 sayfalar), Ayarlar Kılavuzu (4 sayfalar), Tamamlayıcı Kılavuz (17 sayfalar), Kullanım Talimatları (1 sayfalar)

Upgrade Strategy

Splash DC Series v3.0 Production (512Mb) to Splash DC Series v4.0 Upgrade Kit for G3 Mac Platforms: This

kit upgrades existing v3.0 G3 Mac platforms with 512 Mb of frame buffer memory to a Splash DC Series v4.0

platform. This includes new hardware, Splash software, and upgraded operating system software.

Splash DC Series v3.0 256Mb to Splash DC Series v4.0 Upgrade Kit for G3 Mac Platforms: This kit upgrades

existing v3.0 G3 Mac platforms with 256 MB of frame buffer memory to a Splash DC Series v4.0 platform. This

includes new hardware, Splash software, and upgraded operating system software.

Splash DC Series v3.0 256 MB or 512Mb to Splash DC Series v4.0 Upgrade Kit for Non G3 Mac Platforms:

This kit upgrades existing v3.0 non-G3 Mac platforms with either 256 Mb or 512 MB of frame buffer memory to a

Splash DC Series v4.0 platform. This includes new hardware, Splash software, and upgraded operating system

software (Note: the non-G3 platforms are: 8600 or 9500 platforms).

Finishing Options

Staple Support is limited to the following paper sizes: A4 LEF, B5 LEF, 8x10 LEF, and Letter LEF.

Staple Limits

The Splash DC Series v4.0 server and DocuColor 40/30 Pro will staple a job up until the frame buffer memory of

the server is exceeded or up to the stapling specifications of the optional finisher.

Calibration

Splash DC Series v4.0 supports ColorCal via an external scanner. The calibration process is simple and verifiable.

The scanner is bundled with the system and includes Splash ColorCal software that has been optimized for use with

the scanner and Splash DocuColor Series v4.0 server.

Print Quality and Color Management

The appearance of the document displayed on the monitor screen may not match the output print unless Splash

ColorCal and color correction tools are used. (Note: This assumes the monitor is calibrated)

For imported RGB images, optimal color is achieved in the EPS and TIFF format. Other imported file formats

may produce unexpected results.

Separations Support

Separations Support is enabled at the printer driver and prints a composite proof of separation documents. When

"Automatic" separations option is selected for a print job, the Splash RIP While Receive feature is disabled for the

job.

The following applications are supported for separation printing:

QuarkXPress versions 3.1 – 4.0

PageMaker versions 4.5 – 6.5

Freehand versions 3.1 – 5.5

Canvas versions 3.0 – 3.5

CorelDraw versions 6 or later

Adobe Illustrator version 7.0 (user must create an EPS and place it into either a QuarkXPress or PageMaker

document)

Terms and product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.

Launch Version

Page 4 of 8

Expectation Setting Document for

Splash DC Series v4.0

Digital Front End for DocuColor 40/30 Pro

701P99809

18 March 1999

40_ced-s.doc