Xerox Document Centre 255 ST Hızlı Kurulum - Sayfa 2

Fotokopi Makinesi Xerox Document Centre 255 ST için çevrimiçi göz atın veya pdf Hızlı Kurulum indirin. Xerox Document Centre 255 ST 3 sayfaları. Os/2 warp 4.0 (netbeui) peer-to-peer network
Ayrıca Xerox Document Centre 255 ST için: Hızlı Kurulum (2 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Hızlı Kurulum (2 sayfalar)

Sayfayı Yazdır
OS/2 Warp 4.0 (NetBEUI) Peer-to-Peer Network Quick Install Card
Xerox Document Centre 240/255/265 LP/ST
6.
Assign a Printer Name and Description
a)
Press the Printer Description button.
b)
Press the Printer Name button. Using
the touch panel keys, enter the
desired text for this item then press
Save. Press Save again to return to
the previous screen.
c)
OPTIONAL STEP: Press the Printer
Description button. Using the touch
panel keys, enter the desired text for
this item then press Save.
d)
Press the Connections button.
e)
Set Maximum Connections and
Timeout
f)
Touch the Maximum Connections
soft button on the Touch Screen and
on the keypad enter the desired
maximum connection number
between 1 and 30. It is
recommended that this value should
be set at the default.
g)
Touch the Connection Timeout soft
button on the Touch Screen. On the
keypad enter the desired number of
second between 0 and 9999. Press
Save to exit the Connections Screen.
h)
Press the Exit Tools button.
7.
Wait a MINIMUM of 7 minutes for the
printer to reset.
8.
From the documentation package supplied
with your printer, retrieve the CentreWare
Network Services CD-ROM (CD-ROM 2)
and the document entitled Gettting
Started with Print and Fax Services.
Proceed to the next section of this
procedure called Go to the workstations
and..
Go to the workstations and...
1.
Perform an OS2 Warp (4.0) Selective
Install.
a)
Install Both NetBIOS (NetBEUI) and
NetBIOS for IP during the install
process.
b)
Select and Enable all of the file and
print sharing options during the
Selective Install process.
2.
Create a shared resource and connect it to
the network device.
a)
Double-click on the Connections
Icon.
b)
Click on the + symbol next to
Network.
c)
Click on the + symbol next to Network
Services.
Page 2
d)
Double Click on Start File and Print
Client.
e)
Close the Logons window.
f)
Double-Click on Shared Resources
and Network Connections
g)
Close the Connections window.
h)
Enter a valid user/password (the one
entered at the client installation).
i)
Select the Connections tab of these
property pages.
j)
Select the Create connection button.
k)
Set the resource type to Printer.
l)
Enter the machines hostname in the
Server field.
m)
Select the desired lpt port.
n)
Verify that the Connect to resource
at logon button is selected.
o)
Place the cursor in the server field and
press the Enter key on the keyboard.
p)
Click the OK button after the share
name appears in the Resource
window.
q)
Close the Shared Resources and
Network Connections - Properties
window.