Xerox Document Centre 265 LP Hızlı Kurulum Kılavuzu - Sayfa 2

Fotokopi Makinesi Xerox Document Centre 265 LP için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Xerox Document Centre 265 LP 2 sayfaları. Os/2 warp 4.0 (netbeui) peer-to-peer network
Ayrıca Xerox Document Centre 265 LP için: Hızlı Kurulum (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Tamamlayıcı Kılavuz (2 sayfalar), Hızlı Kurulum (2 sayfalar), Hızlı Kurulum (3 sayfalar)

Sayfayı Yazdır
Microsoft Windows (NetBEUI) Peer-to-Peer Networks Quick Install Card
Xerox Document Centre 240/255/265 LP/ST
c)
OPTIONAL STEP: Press the Printer
Description button, using the Touch
Screen keys, enter the desired text for
this item then press Save.
d)
Press the Connections button.
7.
Set Maximum Connections and Timeout
a)
Touch the Maximum Connections
soft button on the touch screen and on
the keypad enter the desired
maximum connection number
between 1 and 30. It is recommended
that this value should be set at the
default.
b)
Touch the Connection Timeout soft
button on the Touch Screen. On the
keypad enter the desired number of
second between 0 and 9999. Press
Save to exit the Connections Screen.
c)
Press the Exit Tools button.
8.
Wait a MINIMUM of 7 minutes for the
printer to reset.
9.
Obtain a Configuration Report from the
printer to use in the remainder of the
installation.
10.
From the documentation package supplied
with your printer, retrieve the CentreWare
Network Services CD-ROM and the
document entitled Getting Started with
Print and Fax Services. Proceed to the
next section of this procedure called Go to
the workstations and.
Go to the workstations and...
11.
Verify that the NetBEUI protocol is loaded
(ALL Windows 3.11 or greater versions).
12.
Use the CentreWare Network Services
CD-ROM (CD-ROM 2) to install print
drivers on a Windows-based workstation.
Details for this are found in the document
supplied with your printer entitled Getting
Started with Print and Fax Services.
13.
On the Configuration Report review the
NetBIOS: area and note the Workgroup,
Host Name, and Printer Name.
Windows for Workgroups Users
Open the Control Panel and double-click
•
the Printers icon.
•
Select the printer driver you just installed
and click Connect.
Select an available port and click Network.
•
•
Double-click the name of the WorkGroup for
the printer.
•
Double-click the Host Name of the printer.
•
Click once on the Printer Name then click
OK.
Page 2
Windows 95, Windows 98 and Windows
NT 4.X Workstation Users
Click the Start button and select Settings.
•
From the cascade menu select Printers.
•
•
Select a printer with the right mouse button.
Select the Properties entry in the cascade
•
menu.
Select the Details tab on the Properties
•
dialog.
Click the Add Port button and browse to the
•
Workgroup.
•
Double-click the name of the WorkGroup for
the printer as shown on the Configuration
Report.
•
Double-click the Host Name of the printer as
shown on the Configuration Report.
•
Click once on the Printer Name then click
OK.
14.
Open an application and print a test page
to verify operation.
15.
If your print job does not print, refer to the
Troubleshooting section of the Network
Installation and Troubleshooting Guide
to solve the problem.