Xerox Majestik 5765 Referans Kılavuzu - Sayfa 23

Fotokopi Makinesi Xerox Majestik 5765 için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Xerox Majestik 5765 44 sayfaları. Majestik color series digital color copier / printer
Ayrıca Xerox Majestik 5765 için: Tamamlayıcı Kılavuz (1 sayfalar), Referans Kılavuzu (7 sayfalar), Referans Kılavuzu (7 sayfalar), Referans Kılavuzu (18 sayfalar), Teknik Özellikler (7 sayfalar)

Sayfayı Yazdır

Transparencies

MAJESTIK 5760/5765 MATERIALS USAGE GUIDE

Material Description & Expectations

Transparency stock is used primarily to create images that can be

projected onto a wall or screen. Transparencies are made of

polyester film that is specially coated to make dry ink (toner) readily

adhere to it. The base material and coating type are both very

important in the final quality of the projected image. The

recommended Xerox transparencies meet the critical parameters for

friction, clarity and toner adhesion required for optimum feeding and

color image quality. When run as described below, feeding

performance will be good, but will not equal the reliability of 24 lb LX

paper.

Recommended Materials

U.S.:

Xerox Removable Stripe, Good Quality , 8.5 x 11" = 3R3108

Xerox Removable Stripe, Premium Quality , 8.5 x 11" = 3R5765

Xerox Painted Stripe, Good Quality , 8.5 x 11" = 3R5775

Canada:

Xerox Removable Stripe, Good Quality , 8.5 x 11" = 3R3108

Xerox Removable Stripe, Premium Quality , 8.5 x 11" = 3R5765

Xerox Painted Stripe, Good Quality , 8.5 x 11" = 3R4894

1 2 3. . .

Steps for Success

1 Do not run Stripeless transparencies (those without a removable

or painted lead edge white stripe), or Paper-Backed

transparencies in the 5760/5765. These will cause frequent jams

and possible machine damage.

2 Remove all paper from the Paper Tray Bypass before loading

transparencies.

3 Load all transparencies in the Paper Tray Bypass with the white

stripe (removable or painted) at the leading edge.

4 All transparencies MUST be loaded with the removable or

painted stripe side (dull side) DOWN in the tray. Immediate jams

and machine damage are likely to occur if incorrectly loaded.

5 Fan the stacks before loading for optimum feeding performance.

6 From the Paper Tray (Bypass) screen, select Paper/

Transparency mode for all 11" Removable Stripe

Transparencies. For 11" Painted Stripe Transparencies, select

Transparency Interleave mode to provide the best feeding

reliability.

USAGE GUIDELINES