Xerox WorkCentre 5645 Hızlı Başlangıç Kılavuzu

Fotokopi Makinesi Xerox WorkCentre 5645 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Xerox WorkCentre 5645 10 sayfaları. Smart card
Ayrıca Xerox WorkCentre 5645 için: Hızlı Kullanım Kılavuzu (38 sayfalar), Değerlendirici El Kitabı (28 sayfalar), Broşür ve Teknik Özellikler (8 sayfalar), Teknik Özellikler (18 sayfalar), Teknik Özellikler (20 sayfalar), Teknik Özellikler (19 sayfalar), Kurulum Kılavuzu (43 sayfalar)

Sayfayı Yazdır
Xerox WorkCentre 5645 Hızlı Başlangıç Kılavuzu
JOB STATUS:
FEATURES:
Displays the job features on the screen
Features* are accessible by touching the tabs or All Services,
LOAD PAPER
LOAD PAPER
• Open the required
paper tray.
• Load the paper, do
not load above the
maximum fill line.
• Adjust the guides to
touch the edge of
the paper.
• Close the paper
tray, except the
Bypass Tray.
• Confirm the paper
size/type settings
on the user
interface.
For more information... 1. Press ? on the control panel, 2. refer to the Quick Use Guide, 3. refer to
the Interactive User Guide CD2, or 4. visit our website on...
MACHINE STATUS:
Displays machine information
Displays the job queue information
FAX
QUICK FAX
• Load the original
face up in the
document handler.
• Touch the FAX or
INTERNET FAX tab.
• Touch the screen
buttons to make
feature selections.
• Enter the receiving
fax number using
the keypad or select
an e-mail address
from the ADDRESS
BOOK.
• Press START.
TOUCH SCREEN -
Displays all the available
features and general machine information
CLEAR ALL -
Resets features to their default
settings
PAUSE -
Interrupts current job
START -
Starts the job
*Some features may not be available on your model.
E-MAIL
QUICK E-MAIL
• Load the original
face up in the
document handler.
• Touch the E-MAIL
tab.
• Touch the screen
buttons to make
feature selections.
• Make a selection
from the ADDRESS
BOOK.
• Press START.
www.xerox.com/support
WorkCentre
5632/5638/5645/5655/5665/5675/5687
for example:
COPY
QUICK COPY
• Load the original
face up in the
document handler.
• Touch the COPY
tab.
• Touch the screen
buttons to make
feature selections.
• Press START.