Direct power BH26S3 Güvenlik ve Kullanım Kılavuzu - Sayfa 9

Döner Çekiç Direct power BH26S3 için çevrimiçi göz atın veya pdf Güvenlik ve Kullanım Kılavuzu indirin. Direct power BH26S3 17 sayfaları. 5kg sds plus rotary hammer drill

Sayfayı Yazdır

OPERATION INSTRUCTIONS

1. GENERAL DESCRIPTION

This ROTARY HAMMER DRILL can be used

for drilling masonry. contained in the case is

a selection of larger masonry bits and chisels.

These ﬁt directly into the rotary hammer. Using

the hammer setting the supplied chisels can be

used to break brick work. The machine uses a

single phase alternating current 230V, 50Hz motor,

its compact and robust format makes it versatile

and efﬁcient for uses described in speciﬁc safety

instructions. It complies to current regulations

and the optimum quality of materials used will

ensure a long working life in complete safety.

2. OPERATING INSTRUCTION

Familiarize yourself with the rotary hammer drill

before use.

Note:Make sure the hammer is isolated from the

mains supply before ﬁtting accessories. Before

undertaking any maintenance or operations on

the rotary hammer detach the plug from the

mains socket.

3. FITTING THE AUXILIARY HANDLE

Attached the handle as shown in Fig 2 depending

on being left handed or right handed.

4. FITTING SDS TOOLS

The drill is equipped with an SDS-plus attachment

system. The SDS tools have slots in the shank.

These locate with tabs in the rotary hammer.

Hold the rotary hammer with one hand facing

away from yourself. See Fig 3.

Grip and pull back the fastening sleeve and insert

the SDS tool.

Push inwards until a resistance is felt. It may be

necessary to spin the SDS tool until the shaft

drops completely into place.

Once you are satisﬁed it has seated release the

black fastening sleeve. This should lock the SDS

tool into position.

5. REMOVE SDS TOOL

Pull back fastening sleeve, hold and remove tool.

See Fig 3.

Note:The SDS tools will be gripped ﬁrmly by its

shank and will not be able to be removed.

5kg SDS Plus Rotary Hammer Drill BH26S3

Loosen the handle

Fig 2

Fig 3

Fig 4

Fig 5