ALDEN Satlight Track 60 Kurulum ve Kullanım Kılavuzu - Sayfa 7

Anten ALDEN Satlight Track 60 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. ALDEN Satlight Track 60 15 sayfaları. Portable satellite antenna

Sayfayı Yazdır

1. Technical Features

S.S.C. wiring diagram

LNB IN

OUT TO

14/18V 300mA

DEMO

N° : description

1 : RC

2 : LNB in

3 : Out to demo

4 : Data

5 : USB

6: MOTOR

7: CONTACT

8 : TV OUT

9 : 10-15V DC

Warning - Reminder :

• The system must be in a vertical position in a well ventilated space.

• Do not place the unit near a source of heat or humidity.

• Do not leave the unit direclty in the sunlight.

• The ventilation grille must be free. Do not block.

• Do not use existing coaxial circuits. The quality of the picture can be affected. Each link will weaken the

signal. Cables of a different type can also change the quality of the picture.

• In all cases :

- A direct wiring (no links) with a 5A fuse must go from the unit to the battery for the + wire.

- A direct wiring (no links) must go from the unit to the battery for the - wire.

- A direct wiring (no links) with a 3A fuse must go from the S.S.C. module to the + after ignition

located on the ignition key or on the fuse module.

• When installating with existing wiring, make sure the 3 cases above are respected.

• Always use the provided cables

• The warranty will no longer be applicable if these instructions are not followed.

MOTOR SKEW

DATA

Type of connection

Optionnel: Interface utilisateur déportée.

F Type coaxial

USB

Power

Spade connector

TV output

Jack DC

10 - 15VDC

TV OUT

Input and output description

Connection with the sat-unit's LNB.

Connection used to connect the SSC module to the

receiver or satellite TV.

For Alden's use only

Used to update the data.

Used for the motorisation of the sat-unit.

Folding security system connected to the car

Used to power up a 12V/3A max. TV

12V SSC Power supply

ignition.