Xerox 850DX - Phaser Color Solid Ink Printer Temizlik Talimatları Kılavuzu - Sayfa 9

Yazıcı Aksesuarları Xerox 850DX - Phaser Color Solid Ink Printer için çevrimiçi göz atın veya pdf Temizlik Talimatları Kılavuzu indirin. Xerox 850DX - Phaser Color Solid Ink Printer 9 sayfaları. Installation guide for accxes 10.2
Ayrıca Xerox 850DX - Phaser Color Solid Ink Printer için: Teknik Özellikler (2 sayfalar), Operatör El Kitabı (16 sayfalar), Tamamlayıcı Kılavuz (1 sayfalar), Tamamlayıcı Kılavuz (11 sayfalar), Kurulum Kılavuzu (1 sayfalar), Tamamlayıcı Kılavuz (26 sayfalar), Yayın Notu (33 sayfalar), Yayın Notu (11 sayfalar), Yayın Notu (11 sayfalar), Kurulum Talimatları (2 sayfalar)

Sayfayı Yazdır
Xerox 850DX - Phaser Color Solid Ink Printer Temizlik Talimatları Kılavuzu
Cleaning Phaser® 850 Printers
Cleaning for multipicks: separator pad
If the printer picks multiple sheets of paper from the upper tray, clean the separator pad.
1.
Remove the upper media tray from the printer.
2.
Using an alcohol-soaked cloth, gently wipe the separator pad.
3.
Inspect the separator pad for damage to the metal edge; it should be free of dents and lie flat
against the rubber surface. If any damage is seen, the separator pad should be replaced.
4.
Replace the upper media tray in the printer.

Cleaning for lower tray jams: paper-feed rollers

If the printer feeds paper incorrectly or feeds more than one sheet at a time from the High-Capacity
Paper Tray Assembly, and the rollers are visibly dirty, perform the following cleaning procedures.
1.
Remove the paper tray from the High-Capacity Paper Tray Assembly. If your printer has two
assemblies, remove the tray from each one. The two paper-feed rollers for each assembly are
visible when each tray is removed.
2.
Using an alcohol-soaked cloth, scrub the rollers thoroughly. Rotate the roller several times to
ensure proper cleaning.
3.
Replace the paper tray in the High-Capacity Paper Tray Assembly.
8
9103-63
9103-22
Phaser 850 Color Printer