Xerox 850DX - Phaser Color Solid Ink Printer Tamamlayıcı Kılavuz - Sayfa 14

Yazıcı Aksesuarları Xerox 850DX - Phaser Color Solid Ink Printer için çevrimiçi göz atın veya pdf Tamamlayıcı Kılavuz indirin. Xerox 850DX - Phaser Color Solid Ink Printer 26 sayfaları. Installation guide for accxes 10.2
Ayrıca Xerox 850DX - Phaser Color Solid Ink Printer için: Teknik Özellikler (2 sayfalar), Operatör El Kitabı (16 sayfalar), Tamamlayıcı Kılavuz (1 sayfalar), Tamamlayıcı Kılavuz (11 sayfalar), Kurulum Kılavuzu (1 sayfalar), Temizlik Talimatları Kılavuzu (9 sayfalar), Yayın Notu (33 sayfalar), Yayın Notu (11 sayfalar), Yayın Notu (11 sayfalar), Kurulum Talimatları (2 sayfalar)

Sayfayı Yazdır

Xerox 850DX - Phaser Color Solid Ink Printer Tamamlayıcı Kılavuz

XES Synergix 8825/8830/8855 Digital Solution Folding Supplement

Title Block Position Solutions Chart

Typically, print jobs that consist of files that are standard drawing sizes, printed on standard media sizes available in the printer will be folded with the title block

visible on the folded package. If there is a problem getting the title block positioned as desired, refer to the Chart and begin with Solution 1 to try and isolate the

problem.

Solutions

•

Verify Folder is

capable of making

If the style is available, continue with Solution 2. If a style is not available, the desired fold is non-conforming and cannot be

folded.

the desired fold

•

Verify that the Fold

If enabled, continue with Solution 3. If not enabled, load the Fold Style program and run the print job again. Loading the program

Style program is

may require that the printer and controller be switched off then on (rebooted) or Service be called.

enabled on the

Folder.

•

Verify that the

media loaded in the

Run the print job again. If the job is incorrect, continue with Solution 4.

Printer will allow the

desired Fold Style

to be folded.

AccXES Client Tools

Reference the User Documentation provided with the Folder and check that a Fold Style is available that will position the title

block in the desired position.

At the Folder Operator Control Panel, check that the desired Fold Style program is enabled.

Check that the media series (ARCH, ANSI, or ISO) in the printer match the available Fold Styles and or Folder Type.

Load the standard width media rolls in the printer for the media series being used.

Windows Optimized

HP-GL/2 Driver

Web PMT

(95/98/NT 4.0/2000)

Postscript Driver