Xerox Fiery X12 Manuel Kullanım - Sayfa 11

Yazıcı Aksesuarları Xerox Fiery X12 için çevrimiçi göz atın veya pdf Manuel Kullanım indirin. Xerox Fiery X12 12 sayfaları. Controller interface kit

Procedures

9. Connect the other end of the monitor power cable to a wall outlet.

10. Once all the cables are connected to the back of the, power on the monitor and the

Fiery X12/Fiery X40.

11. Once the Control Panel screen indicates that the upgrade is complete, press any key on

the Control Panel to reboot the system.

If the screen indicates that the system was not upgraded, check to make sure you installed

the correct BIOS chip on the motherboard. If the screen still indicates that the system

was not upgraded, restore the previous conﬁguration and contact your service support

center.