Xerox Phaser 4500 Ağ Kılavuzu

Yazıcı Aksesuarları Xerox Phaser 4500 için çevrimiçi göz atın veya pdf Ağ Kılavuzu indirin. Xerox Phaser 4500 8 sayfaları. Black-and-white laser printer
Ayrıca Xerox Phaser 4500 için: Hızlı Referans Kılavuzu (10 sayfalar), Broşür (8 sayfalar), Broşür (1 sayfalar), Tamamlayıcı Kılavuz (2 sayfalar), Gönüllü Ürün Erişilebilirlik Şablonu (11 sayfalar), Tamamlayıcı Kılavuz (5 sayfalar), Manuel (9 sayfalar), Hızlı Referans Kılavuzu (11 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kurulum Kılavuzu (28 sayfalar), Yükseltme Kılavuzu (4 sayfalar), Kullanıcı Kılavuzu (4 sayfalar), Hızlı Referans Kılavuzu (11 sayfalar), Hızlı Referans Kılavuzu (11 sayfalar), Hızlı Kılavuz (3 sayfalar), Manuel (5 sayfalar)

Connections and IP Address

This topic includes:

"Printer Setup" on page 3-2

"Connection Setup" on page 3-6

The information in this section is also stored as an information page in your printer.

Use the front panel to quickly print this information in the future.

Ethernet Connection (Recommended)

An Ethernet connection is recommended because it is faster than a USB cable connection. It

also allows the user direct access to CentreWare IS.

Network Connection

Use an Ethernet connection with two twisted-pair (Category 5/RJ-45) cables and an Ethernet

hub. Connect the computer to the hub with one cable, then connect the printer to the hub with

the second cable. Connect to any port on the hub except the uplink port. TCP/IP and EtherTalk

are the most common protocols used with Ethernet cables. To print using TCP/IP, each

computer and printer requires a unique IP address. Go to "Setting an IP Address" in this

section.

Standalone (Cable or DSL) Network Connection

For information about setting up a cable or DSL connection for your printer, go to

www.xerox.com/office/infoSMART

Tutorial and Home Networking Guidelines.

Setting an IP Address

If your computer is on a large network, contact your network administrator for the appropriate

TCP/IP addresses and additional configuration information.

If you are creating your own small Local Area Network or connecting the printer directly to

your computer over Ethernet, follow the procedure for automatically setting the printer's IP

address.

The printer and computer(s) must have unique IP addresses. It is important that the addresses

are similar, but not the same. For example, your printer can have the address 192.168.1.2 while

your computer has the address 192.168.1.3. Another device can have the address 192.168.1.4.

For more information, go to

to view Document # 33188, entitled Basic TCP/IP

www.xerox.com/office/infoSMART

3-2

Phaser™ 4500 Laser Printer

to view Document # 18545.