Xerox PHASER 5400 Hızlı Kurulum Kılavuzu - Sayfa 22
Yazıcı Aksesuarları Xerox PHASER 5400 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Xerox PHASER 5400 40 sayfaları. 1000-sheet stacker
Ayrıca Xerox PHASER 5400 için: Teknik Talimatlar (5 sayfalar), Manuel (11 sayfalar), Kurulum Talimatları (2 sayfalar), Kağıt El Kitabı (2 sayfalar)
Sayfayı Yazdır
Printer driver installation
1.
Install the printer drivers for your printer. Within CD Navigator,
select Printer Drivers, and then select Install Xerox Phaser 5400
Laser Printer Drivers.
Note
The Xerox TCP/IP Port Monitor has not been installed yet. It
is necessary to temporarily install the printer drivers to an
alternate port. A local port, such as LPT1, is recommended.
2.
Run the TCP/IP Port Monitor Setup program located on your
printer's CD-ROM:
Click Start and Run.
a.
b.
In the Run window, type: <CD drive>:\instal\utility\Tcp Ip
Port Monitor\Windows 2000\<language>\setup.exe.
3.
In the first dialog box, select Install/Upgrade Port Monitor and
click OK.
Port monitor installation
1.
The installation process automatically copies the files to the
system directory. When this process has been completed, a dialog
box appears that reads: The Xerox TCP/IP Port was successfully
installed. To add or remove ports, select the ports tab in your
printer properties.
Click OK.
2.
Adding a port
1.
To add a TCP/IP port, open the Printer Properties dialog box for
the printer you would like to attach the new TCP/IP port.
a.
Click Start, scroll to Settings, and click Printers.
b.
Click your right-mouse button on the printer to which you
want to attach the new TCP/IP port, and select Properties.
Select the Ports tab, and click the Add Ports button.
2.
3.
From the list of available printer port monitors, select the Xerox
TCP/IP Port, and then click the New Port button.
16
Xerox Phaser 5400 Laser Printer