Xerox PHASER 5400 Hızlı Kurulum Kılavuzu - Sayfa 26
Yazıcı Aksesuarları Xerox PHASER 5400 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Xerox PHASER 5400 40 sayfaları. 1000-sheet stacker
Ayrıca Xerox PHASER 5400 için: Teknik Talimatlar (5 sayfalar), Manuel (11 sayfalar), Kurulum Talimatları (2 sayfalar), Kağıt El Kitabı (2 sayfalar)
Sayfayı Yazdır
Macintosh EtherTalk Network
Quick install steps
1.
Print the Configuration Sheet. Details are in this document in
Appendix A: Print the Configuration Sheet.
2.
Check the Configuration Sheet and verify that the EtherTalk is
enabled, the AppleTalk name is correct, the AppleTalk zone is
correct (if used), and the proper connector is enabled. Details are
in the Advanced Features and Troubleshooting Manual.
3.
Use the software installer to load print drivers. Details for this are
found in your printer's CD-ROM.
4.
Select your printer and zone (if used) in the Chooser.
5.
Send a print job to the printer.
6.
Check the print job for print-quality. If print-quality problems
exist, use the print-quality section of your printer's Advanced
Features and Troubleshooting Manual to correct the problem.
7.
If your print job did not print, see the Troubleshooting section for
your operating system in the Advanced Features and
Troubleshooting Manual to correct the problem.
20
Xerox Phaser 5400 Laser Printer