Xerox PHASER 5400 Manuel - Sayfa 3

Yazıcı Aksesuarları Xerox PHASER 5400 için çevrimiçi göz atın veya pdf Manuel indirin. Xerox PHASER 5400 11 sayfaları. 1000-sheet stacker
Ayrıca Xerox PHASER 5400 için: Hızlı Kurulum Kılavuzu (40 sayfalar), Teknik Talimatlar (5 sayfalar), Kurulum Talimatları (2 sayfalar), Kağıt El Kitabı (2 sayfalar)

Sayfayı Yazdır

XEROX PHASER 5400 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS

1. New toner (820g) for use in Phaser 5400

2. New drum for use in Phaser 5400

3. Replacement cartridge pins

4. New replacement chip

5. New doctor blade (optional)

6. New magnetic roller sleeve (optional)

7. Sealing strip

8. Cotton swabs

9. Isopropyl alcohol

10. Drum padding powder

11. Conductive grease

12. Dedicated magnetic roller cleaner

1. Phillips head screwdriver

2. Small common screwdriver

3. Needle nose pliers

4. Spring hook

5. Vacuum approved for toner

1. Turn the cartridge so that the handle is towards you (spring on the right). On either side of the cartridge is a white plastic pin

with one way screw heads. These pins are what hold and lock both halves together. Specialty drivers to remove them are not

available (at the time of this writing) so the only way to remove them (at the time of this writing), is to insert a 1" long or

#8 woodscrew into the center of the pin. Pull/pry out to remove. Leave the screws in so they can easily be installed.

www.uninetimaging.com

UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]