Xerox Phaser 750DP Servis Kılavuzu - Sayfa 20
Yazıcı Aksesuarları Xerox Phaser 750DP için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Xerox Phaser 750DP 40 sayfaları. Digital color printer / copier
Ayrıca Xerox Phaser 750DP için: Teknik Özellikler (2 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Referans Kılavuzu (8 sayfalar), Manuel (9 sayfalar)
Sayfayı Yazdır
Status
Code
07-281,
The control logic sensed a timing error for the Lift Up Time of Tray 1(07-281), Tray 2 (07-282), Tray 3 (07-283) or Tray
282, 283,
4 (07-284).
284
Initial action:
Switch off the machine power.
Power the machine on.
If the problem still exists:
Place a service call.
Tray Load
The control logic has sensed that no paper is being detected in one of the paper trays.
Paper for
Initial action:
Tray 1, Tray
Go to the Paper Tray which was selected on the Control Panel and verify that the Paper Size Indicator is set
2, Tray 3,
to the correct paper size that is loaded in the Paper Tray.
Tray 4, or
the Bypass
Go to the Paper Tray which was selected on the Control Panel and verify that the paper is loaded correctly.
Tray
For the appropriate tray, clean the Tray Feed, Retard, Nudger, Preregistration and Registration Rolls with a
damp cloth (water). (REP 5.22) (REP 5.24)
NOTE : Check for obvious damage, missing or broken Drive Motor gear assemblies and drive belts. These
items may cause a sensor failure to be displayed as an operator error message.
If the problem still exists:
Place a service call.
Fault Code Procedures
Description/Direction
5/98
2-20
5750 DocuCare Service Manual