Xerox Phaser EX7750 Hızlı Başlangıç Kılavuzu - Sayfa 18
Yazıcı Aksesuarları Xerox Phaser EX7750 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Xerox Phaser EX7750 28 sayfaları. Phaser with efi fiery network color server
Ayrıca Xerox Phaser EX7750 için: Detaylı Özellikler (4 sayfalar), Kurulum Kılavuzu (2 sayfalar)
Sayfayı Yazdır
T
O CONNECT TO THE NETWORK
1. Make sure the EX7750 is powered off before connecting it to any network device (see
2. Connect the network cable to the network port on the back of the EX7750
RJ-45 Printer interface (Ethernet Crossover)
RJ-45 Network port (10/100/1000BaseTX)
10 Quick Start Guide
Connecting the EX7750 to a functioning network
When you add the EX7750 to a network, it is assumed that a network administrator
has already installed a network cabling system and has connected workstations and
servers. For examples of different networks, see the
The procedure below describes how to connect the EX7750 to an Ethernet network.
The lower RJ-45 port on the back of the EX7750 is a 10/100/1000BaseTX Ethernet
network connector for a Category 5e unshielded twisted pair network cable. When the
network cable is connected, the Ethernet interface automatically detects the speed of
the network environment. Network speed is indicated by two LEDs on the Ethernet
network connector.
At the minimum, use a Category 5e unshielded twisted pair (UTP) network
N
:
OTE
cable to connect to the network port on the back of the EX7750 (see
page
18).
(lower RJ-45).
The Ethernet network cable at the customer site and the Ethernet Crossover
N
:
OTE
cable included with the EX7750 (for connecting the EX7750 to the printer) are not
interchangeable. Make sure you attach the correct cable to the appropriate RJ-45 port
on the EX7750 back panel (see below).
Configuration
Guide.
page
10).