Xerox SquareFold Trimmer Module Kullanıcı Kılavuzu - Sayfa 20
Yazıcı Aksesuarları Xerox SquareFold Trimmer Module için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Xerox SquareFold Trimmer Module 24 sayfaları. Xerox printer accessories user guide
Ayrıca Xerox SquareFold Trimmer Module için: Kullanıcı Kılavuzu (28 sayfalar)
Sayfayı Yazdır
Problem solving
Fault code
E303
A top cover is open.
E304
E308
The Trimmer Waste Container is full or
E940
has a fault.
E941
E943
Booklet Tray on the SquareFold
Trimmer Module is full.
16
Possible cause
Recommended solution
1.
Open the Top Left and Right Covers of the SquareFold
Trimmer Module.
Close the SquareFold Trimmer Module Top Left and Right
2.
Covers.
If fault persists, power off/on the copier/printer.
3.
4.
If fault persists, call for service.
1.
Pull open the container and empty any trimmer scraps from
it.
Reinsert the container into the SquareFold Trimmer Module.
2.
Ensure that the container is fully pushed in, and that the
3.
indicator light is not lit.
4.
If fault persists, repeat Steps 1-3.
5.
If fault persists, power off/on the copier/printer.
6.
If fault persists, call for service.
1.
Remove any booklets from the tray.
If fault persists, power off/on the copier/printer.
2.
If fault persists, call for service.
3.
SquareFold Trimmer User Guide