Xerox 6100BD - Phaser Color Laser Printer Kullanıcı Kılavuzu - Sayfa 22

Yazılım Xerox 6100BD - Phaser Color Laser Printer için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Xerox 6100BD - Phaser Color Laser Printer 28 sayfaları. Disk overwrite installation and usage
Ayrıca Xerox 6100BD - Phaser Color Laser Printer için: Kurulum Kılavuzu (34 sayfalar), Teknik Özellikler (2 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Kurulum Kılavuzu (2 sayfalar), Güvenlik Kılavuzu (38 sayfalar), Kurulum Kılavuzu (2 sayfalar), Yayın Notu (2 sayfalar), Başlangıç Kılavuzu (37 sayfalar), Manuel (34 sayfalar), Manuel (34 sayfalar), Başlangıç Kılavuzu (34 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Manuel (11 sayfalar), Kurulum ve Kullanım Kılavuzu (8 sayfalar)

Sayfayı Yazdır

Xerox 6100BD - Phaser Color Laser Printer Kullanıcı Kılavuzu

Using DocuSP IPDS

System configuration

Trace

3-6

The following lists the features that control system configuration and

affect how IPDS communicates with the host and with DocuSP.

•

Host Interface allows you to select the IPS Manager connection

method to the host, either TCP/IP or channel.

•

Configuring the TCP/IP connection allows you to identify the TCP/IP

port number used with the TCP/IP address assigned to the DocuSP

controller to send data to the IPS Manager from the host computer.

NOTE: PSF defaults to port number 5001 if the port is not

changed in the printer definition.

•

Configuring the channel connection allows you to identify the unit

address and channel speed assigned to the DocuSP controller to

send data to the IPS Manager from the host computer.

NOTE: Channel modes are dictated by the host, host channel

extender speeds, and other properties of the bus and tag network.

See your systems programmer to determine the appropriate channel

speed.

Trace information is useful for diagnosing and correcting problems

with the IPS Manager.

NOTE: If you experience a problem with the IPS Manager, such as a

channel connectivity problem, that you cannot correct, contact your

local Xerox customer support representative for assistance.

The IPS Manager diagnostic trace functions allow you to capture or

replay a trace of the IPDS data stream, or to capture diagnostic

messages within the IPS Manager log files while the DocuSP is

processing a data stream. The Xerox service representative performs

trace functions, but you may be asked to perform one or more of the

trace functions in preparation for a service call.

System administrator access is required to access and use the trace

functions.

•

Capture trace: Captures IPDS data in a file as the data is being

received from the host. The trace file also contains any replies that

the IPS Manager has sent to the host. The trace file is stored in the

/opt/XRXnps/XRXipds/ipdstraces directory.

•

Playback trace: Plays back the previously captured trace file. The

trace file can also be printed. When a trace file is selected for

playback, the system automatically disconnects from the host, and

reconnects when the playback is complete.

NOTE: During a trace capture or playback, the job settings and

tray/bin mappings are not available and cannot be changed until the

trace activity is complete.

Xerox DocuSP IPDS User Guide