Xerox 6180DN - Phaser Color Laser Printer Başlangıç Kılavuzu - Sayfa 31

Yazılım Xerox 6180DN - Phaser Color Laser Printer için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Xerox 6180DN - Phaser Color Laser Printer 37 sayfaları. 26-ppm monochrome/ 20-ppm color
Ayrıca Xerox 6180DN - Phaser Color Laser Printer için: Kurulum Kılavuzu (34 sayfalar), Şartname Sayfası (2 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Kullanıcı Kılavuzu (28 sayfalar), Kurulum Kılavuzu (2 sayfalar), Güvenlik Kılavuzu (38 sayfalar), Yayın Notu (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Manuel (34 sayfalar), Manuel (34 sayfalar), Başlangıç Kılavuzu (34 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Kurulum ve Kullanım Kılavuzu (8 sayfalar), Teknik Özellikler (4 sayfalar), Manuel (28 sayfalar)

Xerox 6180DN - Phaser Color Laser Printer Başlangıç Kılavuzu

Nuvera Stacker/Finisher Script

LPR gateway behavior for document title

XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
For the Nuvera family of printers, you must use the following
script to set up Stackers and/or Finishers:
1. Open a terminal window.
2. Login as root.
3. Type cd /opt/XRXnps/bin/DFA_IsStacker.
4. Press <Enter>.
5. Type ./set –f 0 OR ./set –f 1. Use the value 0 if the
attached DFA device is a finisher, or use the value of 1 if
the attached DFA device is a stacker. Note that there are
spaces before and after the –f switch.
6. Restart DocuSP.
NOTE: This setting is lost on an upgrade or a scrape
install and must be recreated using this procedure.
Prior to DocuSP 4.0, the controller applied the LPR gateway
filename to submitted documents as opposed to the internally
set document name. Starting with DocuSP 4.0, the controller
applies the internal document name to the job.
To set the DocuSP to the pre-4.0 behavior, run the following
script:
1. Open a terminal window.
2. Login as root.
3. Type enablePre40LPRBehavior
4. Press <Enter>.
5. To disable the pre-4.0 LPR behavior, type
disablePre40LPRBehavior
6. Restart DocuSP.
NOTE: A document name set in the job ticket has a higher
precedence than the LPR gateway and internal document
attributes.
DOCUSP 4.1
27