Xerox 6180DN - Phaser Color Laser Printer Başlangıç Kılavuzu - Sayfa 28

Yazılım Xerox 6180DN - Phaser Color Laser Printer için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Xerox 6180DN - Phaser Color Laser Printer 34 sayfaları. 26-ppm monochrome/ 20-ppm color
Ayrıca Xerox 6180DN - Phaser Color Laser Printer için: Kurulum Kılavuzu (34 sayfalar), Şartname Sayfası (2 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Kullanıcı Kılavuzu (28 sayfalar), Kurulum Kılavuzu (2 sayfalar), Güvenlik Kılavuzu (38 sayfalar), Yayın Notu (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Başlangıç Kılavuzu (37 sayfalar), Manuel (34 sayfalar), Manuel (34 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Kurulum ve Kullanım Kılavuzu (8 sayfalar), Teknik Özellikler (4 sayfalar), Manuel (28 sayfalar)

Reset the Xrite Spectrophotometer

Changing the Retain PDL Setting

Perform the following steps to modify the number of PDLs that can

be retained on the DocuSP.

1. On the DocuSP interface, select Setup and System

Preferences. Select the Job Policy tab.

2. Ensure that the setting for Retain PDL files of last 50 jobs is set

as enabled.

3. Select [OK]. Do not restart the system if you are prompted to do

so.

4. In the background, right-click to open the menu. Open a

terminal window.

5. Login as root user.

6. Type: /opt/XRXnps/bin/setretainPDL # and press <Enter>,

where # is a number between 1 and 100. A value of 0

maintains the current setting.

7. Close the terminal window. Restart the DocuSP software.

Perform the following to reset the spectrophotometer:

Ensure that the calibration strip that matches the serial number on

the spectrophotometer is available. If not, order a new one before

continuing.

1. On the DocuSP controller background menu, open a terminal

window.

2. At the % prompt, type:

cd /opt/XRXnps/XRXcalLib/bin

3. From the % prompt, type:

. /resetDTP

This will restore the spectrophotometer to the factory default

settings.

After the reset is complete, follow the standard procedure to

calibrate the spectrophotometer using the Xrite calibration strip.