Xerox 6180DN - Phaser Color Laser Printer Kurulum ve Kullanım Kılavuzu - Sayfa 5

Yazılım Xerox 6180DN - Phaser Color Laser Printer için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Xerox 6180DN - Phaser Color Laser Printer 8 sayfaları. 26-ppm monochrome/ 20-ppm color
Ayrıca Xerox 6180DN - Phaser Color Laser Printer için: Kurulum Kılavuzu (34 sayfalar), Şartname Sayfası (2 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Kullanıcı Kılavuzu (28 sayfalar), Kurulum Kılavuzu (2 sayfalar), Güvenlik Kılavuzu (38 sayfalar), Yayın Notu (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Başlangıç Kılavuzu (37 sayfalar), Manuel (34 sayfalar), Manuel (34 sayfalar), Başlangıç Kılavuzu (34 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Teknik Özellikler (4 sayfalar), Manuel (28 sayfalar)

Xerox 6180DN - Phaser Color Laser Printer Kurulum ve Kullanım Kılavuzu
3. If there are active jobs in the system, a warning message is displayed that all active jobs are deleted.
Select [OK].
4. The Data Overwrite screen is displayed. All Active Jobs, Completed Jobs, and Logs are automatically
overwritten. Select the Overwrite Additional Items option if desired.
Selecting Saved Jobs Only also overwrites all saved jobs in the /var/spool/XRXnps/saved directory.
Selecting Saved Jobs and User-Added Resources also overwrites all additional resources, such as
fonts or forms.
5. Select the Use Fast Mode option if desired. The Use Fast Mode option runs the Disk Overwrite process in a
single write pass only plus sample or full verification.
6. Select [OK].
7. The DocuSP interface and the Solaris operating system are shut down.
8. The system is rebooted into single user mode and requests the root password. Enter the root password, then
press <Enter>.
9. A warning message is displayed asking if you are sure you want to start the Data Overwrite. Type Y and
press <Enter>.
10. The Disk Overwrite process starts.
11. If for some reason the process needs to be halted, press <CTRL> <C>.
12. When the Disk Overwrite process has successfully completed, the system reboots.
13. Some DocuSP printer products, such as the Nuvera 100/120, DocuTech 75/90, DocuPrint 75/90, or
DocuPrint 75MX, have an image disk in the printer itself. In these cases, the image Disk Overwrite process is
automatically started in parallel with the system Disk Overwrite process.
14. After the overwrite is complete, the system reboots and the DocuSP interface restarts.
NOTE: For the Nuvera 100/120 printers, the system powers down after completion of the overwrite process.
The customer needs to power up the system afterward. If the customer is running DocuSP 50 or later on a
Sun W1100Z controller, the customer needs to press <CTRL><D> when prompted to exit out of the single
701P45144
June 2006
5