Xerox DocuColor 242 Kullanıcı Kılavuzu - Sayfa 7

Yazılım Xerox DocuColor 242 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Xerox DocuColor 242 32 sayfaları. Docucolor advanced multifunction
Ayrıca Xerox DocuColor 242 için: İşlev Kılavuzu (12 sayfalar), Yayın Notu (41 sayfalar), Değerlendirici El Kitabı (14 sayfalar), Değerlendirici El Kitabı (16 sayfalar)

Xerox DocuColor 242 Kullanıcı Kılavuzu

Remote Services network configuration

User Guide
2
How do I start using Remote
Services?
After your Xerox customer representative installs and configures
Remote Services, you can immediately access the Home page.
The Home page provides links to all application features included
within Remote Services.
NOTE: For Remote Services registration information, please refer
to the Remote Services Setup Guide.
You can use the following links to access topics discussed in this
section:
Remote Services network configuration
User access
Launching the Remote Services application
Home page navigation
Before Remote Services is ready to provide full service, settings
for your network configuration need to be verified by your Xerox
customer service representative. If your system uses a proxy
server, settings to enable the network connection are defined as
follows:
1. Open the [Remote Services Home: Setup: Network
Settings] page.
2. Enter the HTTP Proxy Server, HTTP Proxy Port, user name
and password.
3. Click [Apply New Settings].
Additionally, your customer service representative must verify
settings for IP Address, Netmask, Gateway and DNS Host on the
[Remote Services Home: Setup: Network Settings] page. As
these settings are read-only in the Remote Services application,
the settings are edited through DocuSP Setup.
Once these settings are configured, Remote Services is ready to
provide full network service.
Or, click Restore Settings if you do not want to modify the
capture settings and you want to restore the settings that were
saved last.
3