Xerox DocuPrint 115 Tamamlayıcı Kılavuz - Sayfa 37

Yazılım Xerox DocuPrint 115 için çevrimiçi göz atın veya pdf Tamamlayıcı Kılavuz indirin. Xerox DocuPrint 115 48 sayfaları. Tape client job submission guide enterprise printing system
Ayrıca Xerox DocuPrint 115 için: Kullanım Kılavuzu (38 sayfalar), Teknik Özellikler (2 sayfalar), Kullanım Kılavuzu (34 sayfalar), Referans Kılavuzu (2 sayfalar), Planlama Kılavuzu (20 sayfalar), Hızlı Referans (2 sayfalar)

Moving over blocks on a tape

Tape Client Job Submission Guide

Managing and printing jobs from the Tape Client

You can position a job tape forward or backward to skip one or

more of the blocks within a file on the tape.

You must initiate the Move command before you start the job;

you cannot move over blocks while the job is printing. If a job is

currently printing, stop input by clicking End on the Tape Client

window, and confirm your action on the confirmation window.

1. In the Move field on the Tape Client window, click Block....

The Move Block window opens.

Figure 2-10. Move Block window

2. On the Move Block window, enter the number of blocks that

you want to skip; or click the arrow buttons until the number

that you want is displayed.

3. Select the direction in which you want to move the tape: RWD

(rewind, or backward) or FWD (forward).

4. Click Move. The Move Block window closes, and the tape

advances or rewinds past the number of blocks that you

indicated.

2-13