Xerox DocuPrint 155 Teknik Özellikler - Sayfa 2
Yazılım Xerox DocuPrint 155 için çevrimiçi göz atın veya pdf Teknik Özellikler indirin. Xerox DocuPrint 155 2 sayfaları. Tape client job submission guide enterprise printing system
Ayrıca Xerox DocuPrint 155 için: Kullanım Kılavuzu (38 sayfalar), Kullanım Kılavuzu (34 sayfalar), Referans Kılavuzu (2 sayfalar), Planlama Kılavuzu (20 sayfalar), Referans Kılavuzu (42 sayfalar), Hızlı Referans (2 sayfalar), Tamamlayıcı Kılavuz (48 sayfalar)
Sayfayı Yazdır
The DocuPrint
®
PowerPlus Series EPS offers two enhancements that reduce costs
and increase productivity. The Internal Dynamic Perforator is the only solution to
selectively perforate documents inline. The Set Recovery Extension allows you to
automatically reprint documents in the event of finisher malfunction.
Xerox DocuPrint
System Control Module
•
Enhanced Sun Blade
platform
TM
•
DVD-ROM Drive, QIC tape
•
Color flat panel display
•
Keyboard and mouse
•
Ethernet interface (10/100BaseT)
•
Controller stand
•
18/36-track tape drive (optional)*
Printer Module
•
Xerographic engine with laser raster imaging system
•
Prints simplex or duplex
•
Monthly duty cycle: up to 4.5 million (DP 155) or
6 million (DP 180) impressions
•
Printer control console shows current printer status
•
Operator attention light
MICR
(Magnetic Ink Character Recognition)
•
Check performance guarantee
•
Consistently exceeds 99.5% read rate
•
Uniformity—maintain a signal strength across
all characters
•
Consistency—maintain uniformity from check to
check and under a range of environmental conditions
•
Durability—maintain image permanence in high-
speed readers/sorters
Datastream Support
DocuSP
®
Common Controller:
•
Adobe PostScript
®
level 3, PDF, HP PCL6, TIFF,
ASCII, VIPP
Software
®
•
LCDS/Metacode (option)
•
NPS/IPS Extension (option):
- PostScript
®
level 2, HP PCL5e, ASCII, VIPP
- Emulates an IBM Printing Systems AFP Group 3
page printer with the AFIG (Advanced Function
Image and Graphics) option
Print Speeds
•
DocuPrint
®
155: Up to 155 ppm. (8.5 by 11 in./A4)
•
DocuPrint
®
180: Up to 180 ppm. (8.5 by 11 in./A4)
Internal Dynamic Perforator
•
Standard one perforator wheel
•
Perforate parallel to the direction of the paper path
•
Operate in static or dynamic mode
•
Edge to edge micro-perf
©2004 XEROX Corporation. All rights reserved. XEROX
®
to change without notice. In support of Xerox' environmental leadership goals, this model may contain some recycled components that are reconditioned. The Xerox Total Satisfaction Guarantee applies to equipment under a Xerox warranty or a Full Service Maintenance Agreement and is
subject to certain conditions. Sun and Sun Blade are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. Adobe
155/155MX • 180/180MX EPS Specifications
®
Paper Handling
•
16 to 110 lb. (60 to 200 gsm) cut-sheet paper weights
•
7 by 10 in. (optional) to 14 by 17 in. (178 by
254 mm to 356 by 432 mm including A4, A3, B4)
paper sizes
•
Transparencies, label stock, tab stock, carbonless
paper, pre-perforated stock, safety stock, and other
specialized application materials
Input:
•
Main tray (tray 1): 1,100-sheet capacity of 20 lb.
(80 gsm) stock
•
Auxiliary tray (tray 2): 600-sheet capacity of 20 lb.
(80 gsm) stock
•
Two high-capacity feeders (trays 3 and 4): 2,600
sheets each of 20 lb. (80 gsm) stock (standard)
•
Up to two additional high-capacity feeders (optional):
2,600 sheets each of 20 lb. (80 gsm) stock input trays
•
7 by 10 in. (178 by 254 mm) enablement kit: enables
feeding of paper as small as 7 by 10 in. (optional)
Output:
•
Two high-capacity stackers (standard); up to two
additional high-capacity stackers (optional). Each
2,500-sheet capacity of 20 lb. (80 gsm) stock
•
Sample tray: 100 sheets of 20 lb. (80 gsm) stock
•
Purge tray: 100 sheets of 20 lb. (80 gsm) stock
•
Bypass transport: enables connection to any DFA-
compliant, third-party inline finishing device (optional)*
Set Recovery Extension
•
Supports connected or inline finishing equipment
•
Printer automatically reprints damaged sets that
the finisher reports as defective
Modular Trade In (MTI)
•
On-site upgrades without hardware changes
®
, TIFF
to the printer module
•
Move from the 155 configuration to the 180
configuration with MTI
Connectivity
DocuSP
LCDS:
- IBM Channel, Ethernet, TCP/IP, off-line tape
Network:
- Ethernet: TCP/IP, Netware, AppleTalk
**
- Token Ring: TCP/IP, Netware, AppleTalk
NPS Extension (option):
- Ethernet: TCP/IP, Netware, AppleTalk
- Token Ring: TCP/IP, Netware AppleTalk
IPS Extension (option):
- Ethernet TCP/IP, Token Ring TCP/IP
- S/370 or S/390 bus and tag
, DocuPrint
, DocuSP
, SquareFold
, FreeFlow
, VIPP
and EOMS
®
®
®
TM
®
**
Common Controller:
®
are trademarks of Xerox Corporation in the U.S. and/or other countries. Product appearance, configuration availability, build status and/or specifications are subject
TM
®
and PostScript
For more information on the Xerox
DocuPrint
Systems and PowerPlus Series,
call 1-800 ASK XEROX or visit us
on the Web at:
Resolution
•
600-dpi input imaged at 600 x 2400 dpi
•
300-dpi input converted to produce
600 x 2400-dpi imaging
Environmental Requirements
•
Recommended operating temperature: 72° ±4°F
(22° ±2°C)
•
Minimum/maximum operating temperature:
50° to 85°F (10° to 29°C)
•
Minimum/maximum relative humidity: 45% ± 10%
(no condensation)
•
Maximum normal altitude: up to 6,000 ft./1830 m
above sea level
•
Audible noise level: meets 82dB noise exposure limit
•
Heat dissipation, in Btu per hour
- System control module: 3,074 Btu
- Printer module: 4,454 standby; 32,770 operating
Electrical Requirements
•
System control: 100-240 VAC, 47-63 Hz, 12 amp
•
Printer module (one of possible configurations
listed below)
- Cord System: 120/208 VAC (2 Phase), 60 Hz,
50 amp dedicated service
- Star: 220/380 VAC or 230/400 VAC or 240/415
VAC (3 Phase), 50 Hz, 30 amp dedicated service
- Delta: 220 VAC or 230 VAC or 240 VAC (3 Phase),
50 Hz, 30 amp dedicated service
•
Agency certification: UL, CSA, CE Mark
Physical Characteristics
Width
Depth
in. (mm)
in. (mm)
System Control Module
10.0 (254)
24.0 (610)
Printer Module, including Printer Control Console
77.3 (1,963)
35.9 (911)
High-Capacity Inverter Feeder/Stacker
41.7 (1,060)
28.3 (719)
High-Capacity Feeder/Stacker Middle Module (optional)
32.4 (822)
28.3 (719)
High-Capacity Feeder/Stacker
32.4 (822)
28.3 (719)
Bypass Transport (optional)
20.4 (518)
28.3 (719)
*Please check with your Xerox representative for availability.
**PowerPlus features available for new printer installations only. Each option sold separately.
®
are registered trademarks of Adobe Systems, Inc. 09/04.
®
155/180 Enterprise Printing
www.xerox.com
Height
Weight
in. (mm)
lbs. (kg)
17.9 (455)
70 (32)
55.0 (1,397)
1,434 (651)
57.7 (1,466)
663 (301)
57.7 (1,466)
521 (237)
59.6 (1,513)
521 (237)
56.1 (1,425)
176 (80)
610P714000B