Xerox FreeFlow Kurulum Kılavuzu - Sayfa 7

Yazılım Xerox FreeFlow için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Xerox FreeFlow 34 sayfaları. For color 560/570 printer
Ayrıca Xerox FreeFlow için: Broşür (2 sayfalar), Yayın Notu (23 sayfalar), Kurulum Kılavuzu (2 sayfalar), Güvenlik Kılavuzu (38 sayfalar), Yayın Notu (33 sayfalar), Önemli Kurulum Bilgileri (2 sayfalar), Kullanıcı Kılavuzu (50 sayfalar), Manuel (18 sayfalar), Hızlı Bağlantı Kılavuzu (2 sayfalar), Taşıyıcı Prosedürleri Kılavuzu (28 sayfalar)

XEROX FREEFLOW PRINT SERVER

GETTING READY FOR THE PRINT SERVER INSTALLATION

The Getting Ready for the Xerox® FreeFlow® Print Server 6.0

Installation guide has been developed for you to use in the

gathering of the technical data required by the Xerox personnel

during installation of your customer's print server hardware and

software. It is used in conjunction with the appropriate printer

installation planning guide.

The Xerox printer with FreeFlow Print Server software provides

a wide range of network printing services on industry-standard

networks, and consists of the following:

•

A UNIX-based computer workstation with a Xerox interface

PWB and FreeFlow Print Server software installed.

•

A supported Xerox printer.

Getting Ready for the Xerox FreeFlow Print Server 6.0

Installation contains the worksheets that must be completed to

support the installation of the Xerox FreeFlow Print Server

software on the server.

When these worksheets are completed they will contain a

record of the state of the system at the time of install. Most

likely, this setup and configuration state will change, so

encourage your customer to keep these worksheets with the

service record of the printer for future reference.

Your customer should not complete the worksheets if they are

not sure of the required information. Always encourage them to

contact the next level of technical support within their

organization for assistance.

NOTE: Worksheet W-5, the Novell NetWare gateway

installation worksheet, refers to on-site setup requirements that

your customer's network administrator should already have

implemented prior to the FreeFlow Print Server install. The

values for the data elements entered during that setup activity

should be recorded on this worksheet.