Xerox Integrated Fiery Color Server Hızlı Başlangıç Kılavuzu - Sayfa 5
Yazılım Xerox Integrated Fiery Color Server için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Xerox Integrated Fiery Color Server 25 sayfaları.
Sayfayı Yazdır
INTRODUCTION
Service Documentation
1-4
Network Connectivity
When the Fiery is connected to a network, it behaves as a
networked printer. The Fiery supports the following network
protocols (rules that enable computers on a network to
communicate with each other):
AppleTalk, Bonjour
TCP/IP, which also includes the BOOTP, DHCP, FTP, HTTP,
These protocols can run concurrently on the same cable.
Computers that use other protocols can print through a server that
uses one of the supported protocols. The Fiery is autosensing, and
handles all connections simultaneously. This information needs to
be managed by a local administrator.
How the Fiery Network Controller Operates
To gain an understanding of how the Fiery Color Server Operates,
consult the Integrated Fiery Color Server for the WC 7700 Series
MFP Installation and Service Guide, Introduction.
This training document is intended to provide general procedures.
For specific detailed procedure, refer to your service
documentation.
IMAP, IPP, IPv4, IPv6, LDAP, LPD, NBT, POP3, Port 9100,
SMB, SMTP, SNMP, SNTP, SSL/TLS, 802.1x and IPSec
protocols
8/09
Integrated Fiery Color Server
CONFIGURATION TRAINING GUIDE