Xerox Nuvera 100 Planlama Kılavuzu - Sayfa 8

Yazılım Xerox Nuvera 100 için çevrimiçi göz atın veya pdf Planlama Kılavuzu indirin. Xerox Nuvera 100 22 sayfaları. Production system
Ayrıca Xerox Nuvera 100 için: Şartname Sayfası (2 sayfalar), Özellikler Kılavuz (34 sayfalar), Kullanıcı Kılavuzu (40 sayfalar), Kullanım Kılavuzu (34 sayfalar), Referans Kılavuzu (2 sayfalar), Planlama Kılavuzu (20 sayfalar), Referans Kılavuzu (42 sayfalar), Hızlı Referans (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Tamamlayıcı Kılavuz (48 sayfalar), Planlama Kılavuzu (38 sayfalar), Planlama Kılavuzu (16 sayfalar), Referans Kılavuzu (2 sayfalar), Teknik Özellikler (2 sayfalar), İpuçları ve Tavsiyeler Kılavuzu (18 sayfalar), İpuçları ve Tavsiyeler Kılavuzu (18 sayfalar), Başlangıç Kılavuzu (26 sayfalar), Başlangıç Kılavuzu (30 sayfalar)

Sayfayı Yazdır
Xerox Nuvera 100 Planlama Kılavuzu
Xerox Document Binder 120-D (DB120-D)

Performance Specifications

Binding
Paper Size / Weight
Cover Sizes
Spine Width / Approx. # of
sheets
Tray Capacity
Warm-up Time
Input Height
Listed below are the Performance Specifications for the
Document Binder 120-D.
US Specifications
8.5" x 11" (216 x 279 mm)
Note: A conversion kit allowing for usage
of A4 / 115V is available. These kits
would be applicable on some specific
markets and special applications.
20 lbs (75 gsm) – 32 lbs index (120 gsm)
bond and flush cut tabs.
Weights above 32 lbs. (120 gsm) should
be used only as dividers or inserts.
Based on 20 lbs (75 gsm) paper
1/16" / 2 – 15 sheets (∗)
1/8" / 16 – 30 sheets
1/4" / 31 – 60 sheets
3/8" / 61 – 90 sheets
1/2" / 91 – 120 sheets
(∗) Minimum sheets for 1/16" dependent
on connected printer. In walk-up mode
however, 1 – 15 sheets are allowed
regardless of connected printer.
Input Tray: 2 pre-loaded cassettes
containing 150 covers each
Output Tray: 20 – 100 finished sets
depending on spine width.
Approx. 2 minutes
34" (860 mm) and 40.2" (1021 mm)
1-2
European Specifications
A4 (210 x 297 mm)
Note: A conversion kit allowing for usage
of Letter size / 230V is available. These
kits would be applicable on some specific
markets and special applications.
20 lbs (75 gsm) – 32 lbs index (120 gsm)
bond and flush cut tabs.
Weights above 32 lbs. (120 gsm) should
be used only as dividers or inserts.
Based on 80 gsm paper
1.5 mm / 2 – 13 sheets (∗)
3 mm / 14 – 28 sheets
6 mm / 29 – 55 sheets
9 mm / 56 – 84 sheets
13 mm / 85 – 120 sheets
(∗) Minimum sheets for 1.5 mm dependent
on connected printer. In walk-up mode
however, 1 – 15 sheets are allowed
regardless of connected printer.
Input Tray: 2 pre-loaded cassettes
containing 150 covers each
Output Tray: 20 – 100 finished sets
depending on spine width.
Approx. 2 minutes
34" (860 mm) and 40.2" (1021 mm)