Xerox Nuvera 100 Başlangıç Kılavuzu - Sayfa 11

Yazılım Xerox Nuvera 100 için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Xerox Nuvera 100 26 sayfaları. Production system
Ayrıca Xerox Nuvera 100 için: Şartname Sayfası (2 sayfalar), Özellikler Kılavuz (34 sayfalar), Planlama Kılavuzu (22 sayfalar), Kullanıcı Kılavuzu (40 sayfalar), Kullanım Kılavuzu (34 sayfalar), Referans Kılavuzu (2 sayfalar), Planlama Kılavuzu (20 sayfalar), Referans Kılavuzu (42 sayfalar), Hızlı Referans (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Tamamlayıcı Kılavuz (48 sayfalar), Planlama Kılavuzu (38 sayfalar), Planlama Kılavuzu (16 sayfalar), Referans Kılavuzu (2 sayfalar), Teknik Özellikler (2 sayfalar), İpuçları ve Tavsiyeler Kılavuzu (18 sayfalar), İpuçları ve Tavsiyeler Kılavuzu (18 sayfalar), Başlangıç Kılavuzu (30 sayfalar)

Operational Safety

Xerox Nuvera Getting Started Guide

Your Xerox equipment and supplies were designed and tested to meet

strict safety requirements. These include safety agency examination,

approval, and compliance with established environmental standards.

Your attention to the following safety guidelines will help ensure the

continued safe operation of your Xerox Nuvera Printer:

Use the materials and supplies specifically designed for your Xerox

Nuvera Printer. The use of unsuitable materials may result in poor

performance of the machine and possibly a hazardous situation.

Follow all warnings and instructions that are marked on or supplied

with the machine.

Place the machine in a room that provides adequate space for

ventilation and servicing.

Place the machine on a level, solid surface (not on a thick pile carpet)

that has adequate strength to support the weight of the machine.

Do not attempt to move the machine. A leveling device that was

lowered when your machine was installed may damage the carpet or

floor.

Do not set up the machine near a heat source.

Do not set up the machine in direct sunlight.

Do not set up the machine in line with the cold airflow from an air

conditioning system.

Do not place containers of coffee or other liquid on the machine.

Do not block or cover the slots and openings on the machine.

Do not attempt to override any electrical or mechanical interlock

devices.

: Be careful when working in areas identified with this

WARNING

warning symbol. These areas may be very hot and should not be

touched.

If you need any additional safety information concerning the machine or

materials, contact your Xerox representative.

Any operator product maintenance procedures will be described in the

user documentation supplied with the product.

Do not carry out any maintenance on this product which is not

described in the customer documentation.

: Do not use aerosol cleaners. Aerosol cleaners can be

WARNING

explosive or flammable when used on electromechanical equipment.

Use supplies and cleaning materials only as directed in the Operator

section of this manual.