Xerox Phaser 7300DN Kullanıcı Kılavuzu - Sayfa 35

Yazılım Xerox Phaser 7300DN için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Xerox Phaser 7300DN 50 sayfaları. Quick reference guide
Ayrıca Xerox Phaser 7300DN için: Sorun Giderme Kılavuzu (40 sayfalar), Özellikler (1 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Özellikler Kılavuz (40 sayfalar), Destek Kılavuzu (28 sayfalar), Kağıt El Kitabı (34 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum ve Hızlı Referans Kılavuzu (45 sayfalar)

Macintosh EtherTalk Network

(MacOS 8.x/9.x/X, version 10.1)

This section provides installation and troubleshooting steps for Macintosh (MacOS 8 through X,

version 10.1):

Quick install steps for MacOS 8.x and 9.x — see page 31.

Quick install steps for MacOS X, version 10.1 — see page 33.

Setting up the Macintosh Ethernet port for TCP/IP or AppleTalk — see page 33.

Macintosh troubleshooting step-by-step — see page 34.

A workstation with the appropriate driver installed.

A working knowledge of the operating system (System 8.0+ or higher) being used on your

workstation.

Proper cabling in use to connect your printer to the network.

If you use EtherTalk, Macintosh computers do not require IP addresses.

Open the AppleTalk Control Panel.

Verify that the Ethernet port is the selected network port.

To install the printer driver, double-click the installer on the Printer Installer and Utilities

CD-ROM.

Perform the next two steps for MacOS 8.x and 9.x.

Open the Chooser, select the LaserWriter driver.

From the right column of the Chooser, select the printer. Click Create to create the desktop

printer.

Perform the next two steps for MacOS X, version 10.1 only.

Open Print Center.

Click Add Printer, select the printer, then click Add.

For more details, refer to the infoSMART Knowledge Base at

www.xerox.com/officeprinting/infoSMART, Document #2562.

Phaser® 7300 Color Printer