Xerox Wide Format 6050 Kullanıcı Kılavuzu - Sayfa 20

Yazılım Xerox Wide Format 6050 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Xerox Wide Format 6050 22 sayfaları. Wide format twain
Ayrıca Xerox Wide Format 6050 için: Sürüm Notları (7 sayfalar), Kurulum Kılavuzu (20 sayfalar), Yayın Notu (23 sayfalar), Yayın Notu (8 sayfalar), Yayın Notu (8 sayfalar), Yayın Notu (9 sayfalar), Müşteri Eğitim Kılavuzu (50 sayfalar), Kullanıcı Kılavuzu (36 sayfalar), Kullanıcı Kılavuzu (48 sayfalar)

Check Driver Setup

The current driver setup information can be displayed in the following procedures:

Chapter 1 Installing Plotter Driver

Margin: Select Use program setting or Always off.

Output Bin: Select Don't care, Fanfold output, or Bin 1 through Bin 13.

Manual output: Select Yes or No to use or not to use the function.

Click [Image Correction] button to open the dialog box.

A correction graph indicates how an output picture image is corrected. By

correcting the graph, you can increase contrast to the output image or adjust

the brightness of the output image.

Saturation: Up-down control for Saturation adjustment

Brightness: Up-down control for Brightness adjustment

Gamma: Up-down control for gamma adjustment

Preset value: Reset the corrected graph to default

Execute the PLOT command to open the "Print/Plot Configuration" dialog.

Click the "Device and Default Selection..." button.

Select the 6030/6050 printer.

Click the "Show" button at "Device Requirements" in the opened dialog box.

The "Show Device Requirements" message box opens. This message box

displays the current driver setup information.