Xerox WORKCENTRE C2424 Kullanıcı Kılavuzu - Sayfa 20

Yazılım Xerox WORKCENTRE C2424 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Xerox WORKCENTRE C2424 43 sayfaları. Copier-printer
Ayrıca Xerox WORKCENTRE C2424 için: Hızlı Referans Kılavuzu (14 sayfalar), Broşür (8 sayfalar), Tamamlayıcı Kılavuz (7 sayfalar), Teknik Özellikler (6 sayfalar), Başlangıç Kılavuzu (26 sayfalar), Kullanıcı Kılavuzu (21 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Bakım Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (19 sayfalar), Talimatlar Kılavuzu (16 sayfalar), Manuel (12 sayfalar), Talimatlar Kılavuzu (6 sayfalar), Kurulum Kılavuzu (4 sayfalar), Kurulum Kılavuzu (2 sayfalar), Besleme Silindiri Kitinin Değiştirilmesi (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Gönüllü Ürün Erişilebilirlik Şablonu (10 sayfalar), Rekabetçi Karşılaştırma (3 sayfalar), Hızlı Referans Kılavuzu (14 sayfalar), Servis Kılavuzu (11 sayfalar), Hızlı Referans Kılavuzu (13 sayfalar)

Sayfayı Yazdır
Xerox WORKCENTRE C2424 Kullanıcı Kılavuzu

Windows NT 4.x

This section includes:
■
"Preliminary Steps" on page 6-20
"Quick CD-ROM Install Steps" on page 6-20
■
■
"Other Methods of Installation" on page 6-21
■
"Windows NT 4.x Troubleshooting (TCP/IP)" on page 6-22
"infoSMART Knowledge Base Documents (English only)" on page 6-24
■
Preliminary Steps
These preliminary steps must be performed for all systems:
1.
Verify that the system is plugged in, turned On, and connected to an active network.
2.
Verify that the system is receiving network information by monitoring the LEDs on the
back of the device or on the CentreDirect External Print Server. When the system is
connected to a functioning network and receiving traffic, its link LED is green, and its
amber traffic LED is flashing rapidly.
3.
Proceed to "Quick CD-ROM Install Steps" or "Other Methods of Installation" for the
installation method desired.
4.
Print a "Configuration Page" and keep it for reference.
Quick CD-ROM Install Steps
1.
Insert the WorkCentre C2424 Software CD-ROM into the computer's CD-ROM drive. If
the installer does not launch, do the following:
a.
Click Start, then click Run.
b.
In the Run window, type: <CD drive>:\INSTALL.EXE.
2.
Select your desired language from the list.
3.
Select Install Device Driver.
4.
Click I Agree to accept the Xerox Software License Agreement.
5.
In the Select Device dialog box, the default Use Walk-Up Technology (recommended
for network systems) is selected. Click Next.
6.
Follow the Use Walk-Up Technology instructions displayed.
7.
Click Exit Program.
Note
If the Walk-Up Technology dialog box remains onscreen after you have completed
Steps 1–6, click the Back button, then click Select from the following discovered
printers. Follow the onscreen prompts to complete the installation procedure.
For more information, go to the table of
this section.
infoSMART Knowledge Base documents
WorkCentre® C2424 Copier-Printer
6-20
Windows NT 4.x
at the end of