Xerox 6180DN - Phaser Color Laser Printer Başlangıç Kılavuzu - Sayfa 15

Yazdırma Sunucusu Xerox 6180DN - Phaser Color Laser Printer için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Xerox 6180DN - Phaser Color Laser Printer 34 sayfaları. 26-ppm monochrome/ 20-ppm color
Ayrıca Xerox 6180DN - Phaser Color Laser Printer için: Kurulum Kılavuzu (34 sayfalar), Şartname Sayfası (2 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Kullanıcı Kılavuzu (28 sayfalar), Kurulum Kılavuzu (2 sayfalar), Güvenlik Kılavuzu (38 sayfalar), Yayın Notu (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Başlangıç Kılavuzu (37 sayfalar), Manuel (34 sayfalar), Manuel (34 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Kurulum ve Kullanım Kılavuzu (8 sayfalar), Teknik Özellikler (4 sayfalar), Manuel (28 sayfalar)

DocuColor printer specific changes

This release introduces the Xerox iGen3 110 with SmartSize

Technology. This new configuration offers new levels of

productivity to customers running certain sheet sizes.

♦ Feeds and images 8 ½ x 11 or A4 sheets at up to 110

impressions per minute.

♦ With SmartSize technology, sheet sizes below 11 x 17

inches or A3 run at varyiung rates automatically,

depending upon how many images can fit on the

photoreceptor.

A new hardware platform is included with the DocuSP 4.2

version of the Xerox iGen3 system.

The Sun fire v890 features the new UltraSPARC IV 64 bit

processor with Chip Multi-threading technology offering two

threads per processor chip. With dual-threaded architecture,

each UltraSPARC IV processor consists of two virtual

processors with shared memory.

The platform configuration is as follows:

♦ 1 CPU/Memory board with 2 dual-threading processors, 16

dual inline memory modules (DIMMs) for 8 GB of memory.

♦ IDE I/O controller for support of DVD/CD-RW drives

♦ 3 x N+1 redundant hot-swappable 240VAC power supplies

♦ 3 x 73 GB hard disk drives, upgradeable to 6

♦ Integrated Fibre Channel dis subsystem

♦ 16 MB external cache per chip

♦ GPIO combo graphic adapter and dual network interface

card

♦ Enhanced diagnostics

♦ For the DocuSP 4.2 product, the iGen3 CMYK source

profile has been improved to more closely resemble

SWOP rendition. This enables customers who are used to

SWOP workflows to more closely emulate SWOP output.

♦ The SWOP Gamut does not fully utilize the iGen3 gamut.

The new SWOP Plus color profile sets hues within the

SWOP gamut to continue to simulate a SWOP press.