Xerox DocuPrint 100MX Güvenlik Kılavuzu - Sayfa 30
Yazdırma Sunucusu Xerox DocuPrint 100MX için çevrimiçi göz atın veya pdf Güvenlik Kılavuzu indirin. Xerox DocuPrint 100MX 38 sayfaları. Freeflow print server micr user guide
Ayrıca Xerox DocuPrint 100MX için: Broşür (4 sayfalar), Teknik Özellikler (2 sayfalar), Kullanıcı Kılavuzu (40 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (32 sayfalar)
Sayfayı Yazdır
Using an Existing Signed Certificate from a Certificate Authority
26
NOTE: During steps 2-5, the user may go back and correct any
mistakes made in previous steps.
–
Click on the 'Enable SSL/TLS' checkbox at the top of the SSL/
TLS window.
–
Select a SSL/TLS mode of operation:
•
Normal (Encrypted and Unencrypted Access)
•
Secure (Encrypted Access Only)
–
Select encryption strength:
•
Normal (DES-MD5-56-bit)
•
Normal (DES-MD5-40-bit)
•
Normal (DES-MD5-128-bit)
•
Normal (3DES-MD5-128bit)
•
High (RC4-MD5-128-bit)
•
High (3DES-MD5-128-bit)
–
If SSL/TLS is not already enabled
–
Click 'Add Certificate'
Step 1 - Select "Signed Certificate from a Certificate Authority"
Step 2 - Select and enter either the server
•
Domain Name
•
IP Address
•
Other
Step 3 - Enter the requested information:
•
Organization (required)
•
Organizational Unit (optional)
•
E-mail (optional)
•
Locality (optional)
•
State/Province (optional)
•
Country (required)
Step 4 - Browse to the location of the signed certificate (.pem
file).
Step 5 - Verify information entered in previous steps.
Step 6 - A message will appear indicating that the certificate
has been installed.
NOTE: During steps 2-5, the user may go back and correct any
mistakes made in previous steps.
Security Guide