Xerox Phaser 6100DN Başlangıç Kılavuzu - Sayfa 23

Yazdırma Sunucusu Xerox Phaser 6100DN için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Xerox Phaser 6100DN 34 sayfaları. Disk overwrite installation and usage
Ayrıca Xerox Phaser 6100DN için: Kurulum Kılavuzu (34 sayfalar), Teknik Özellikler (2 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Kullanıcı Kılavuzu (28 sayfalar), Kurulum Kılavuzu (2 sayfalar), Güvenlik Kılavuzu (38 sayfalar), Kurulum Kılavuzu (2 sayfalar), Yayın Notu (2 sayfalar), Başlangıç Kılavuzu (37 sayfalar), Manuel (34 sayfalar), Manuel (34 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Kurulum ve Kullanım Kılavuzu (8 sayfalar)

Sayfayı Yazdır

Caveat

Copy-Sensitive CME jobs print with extra

pages.

Avoidance: Program a Copy-Sensitive CME in

the START JDL, even if it is a CME

CONSTANT to print a space. The output

prints correctly.

Long jobs that are simplex with a solid

highlight color image in the same location on

each page may cause staining on the fuser

that appears on subsequent jobs. Contact the

Xerox customer support center for assistance.

Jobs programmed with front covers do not

print.

Avoid programming front covers at this time.

Programming a negative shift with JIS B4

stock causes a misalignment between the

black and highlight color images.

Use of DHCP is not recommended. Assign a

static IP address for the system.

DocuSP Remote Workflow does not run in the

Solaris operating system. Use Remote

Workflow on a Windows platform only.

Mismatch processing for highlight color

printing is not supported for IPDS. When

performing highlight color printing, the IPDS

decomposer always prints in the loaded color.

In addition, transparent highlight color mode is

not supported.

Restarting DocuSP causes Remote Services

to restart. Do not restart DocuSP while

capturing or transferring data.

A C17-350 fault occurs when the system

attempts to backup the billing meter

information when the printer is switched off.

Switch on the printer and restart the DocuSP

software to clear the error.

The DocuSP 4.x UI functions much slower on

an Sun Ultra 2.

In Printers, Stackers, if a selection is made for

All Stackers, the selection is not modified for

all. Select each stacker individually and make

the necessary change.

The Reposition Output display only shows the

end of the job and does not show the end of

the set.

Applicable printer product

All monochrome printers

DocuTech 180/155/128 HLC

DocuTech 61xx

DocuPrint 1xx EPS