Calf-Tel MultiMax Montaj Talimatları - Sayfa 4

Çiftlik Ekipmanları Calf-Tel MultiMax için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. Calf-Tel MultiMax 4 sayfaları.
Ayrıca Calf-Tel MultiMax için: Montaj Talimatları Kılavuzu (7 sayfalar)

Sayfayı Yazdır
4. Attach the Hutch to the Base
a) You will need the bag of hutch to base components
AH-150-1
b) Put the hutch on the base with the front opening at the
front of the base nearest the L brackets.
c) Fasten the hutch to the base around the edge using
washers and screws starting at the back corner and
going across the back first.
d) Fasten the two angle brackets near the entrance as
shown to secure the hutch to the base.
e) Drill through the two tabs in the roof as indicated and
bolt the roof to the sides at the front.
5. Attach the reinforcement brackets and rear
bedding door latches
a) You will need two bedding door latches and fixings
and two reinforcement brackets and fixings.
b) Assemble the bedding door latch by pushing the bolt
through from the outside. On the inside, attach the top
of the reinforcement bracket as shown and secure with
the latch nut and washer.
Michaelmas House, Royal Oak Way North, Daventry, NN11 8PQ
b) Secure top of
bracket with latch
nut and washer.
c) Using an 8mm drill
bit, drill through the
plastic using the
hole in the bracket
as a guide.
Intershape Ltd
Tel: 01327 300 395
Drill through tabs here
Bolt angle brackets on here
Web: www.intershape.com
d. Attach
bracket to
plastic with
the CT-
HDWE-037
hardware
kit. Insert
bolt from
outside, put
washer and
nut on the
inside and