eControl 150 Kullanıcı Kurulum Kılavuzu - Sayfa 5

Ocaklar eControl 150 için çevrimiçi göz atın veya pdf Kullanıcı Kurulum Kılavuzu indirin. eControl 150 9 sayfaları. Instaheat hob

2. Introduction

As reputable manufacturers, we ensure that our products are designed and built to satisfy the necessary safety

standards when installed and used appropriately.

Your eControl Cooker has all of the benefits of a heat storage cooker, with the extra convenience of being able to turn

the two hotplates on and off as needed.

To familiarise yourself with the product, refer to the diagram in the Overview chapter and the relevant sections for

the ovens, plates, controls, etc.

Please read the following before using your new appliance for your own safety and convenience.

Keep natural ventilation openings open or install a mechanical ventilation device to ensure that the kitchen is well

ventilated (mechanical extractor hood).

Prolonged intensive use of the device may necessitate additional ventilation, such as opening a window, or more

effective ventilation, such as enhancing the amount of mechanical ventilation in the surrounding area.

Local and national wiring regulations must be followed, and the installation must be completed by a trained engineer.

When first turned on, a small amount of smoke and odour may be produced. This is typical and harmless (due to

oven lagging and starch binder on element insulation), ventilate the room where required.

The hotplates are operated separately from the ovens and of each other.

On the left, the steel boiling plate is located, and on the right, the INSTAHEAT hob is located. The INSTAHEAT hob can

heat up significantly faster than a standard hot plate and is capable of higher temperatures where required.

The eControl INSTAHEAT hob uses a powerful 2.5kw commercial grade infrared heating element capable of ultra-fast

high temperatures.

The Hob selector switch allows the user to decide which hobs are on an any one time. The green neon on the left

hand hob diagram will glow green whilst the hob is selected.

The absolute temperature of the INSTAHEAT hob is controlled by the right hob temperature control on the control

panel (see diagram below).

Cooking can take place on the entire hotplate area, and multiple pans can be placed on a single plate at the same

time. DO NOT DRAG ITEMS FROM ONE PLATE TO THE NEXT, AS THIS WILL DAMAGE THE SURFACE!

The INSTAHEAT Hob should only be used with the hob covers raised and turned off after each cooking cycle. It is not

designed to be left on with the lids down in the style of a traditional hob. If the hob is left on and the lid left down in

error the temperature will automatically be regulated by an automatic reset limiter and periodically isolated by a

back-up overheat thermostat to avoid any risk of overheating. The lid may still be hot under the circumstances.

WARNING: IF THE INSTAHEAT HOB IS LEFT ON CONSTANTLY, THE TOP PLATE AND LID CAN BECOME HOT.