Temperature Sensor Wiring (Cont)
H A N
D
T I G
H T E
N
Place wire between brass
washer and the printed circuit
board and hand tighten screw.
Single
Temperature Sensor
Model TS510W
Sleeping Area
Temperature
Sensor
Wire to
the C365T11
Printed circuit board
Brass washer
The TS5 can be installed in a
single gang box or directly to
the wall using the hardware
provided.
Dual
Temperature Sensors
Model TS520W
Model TS520W
Sleeping Area
Sleeping Area
Temperature
Temperature
Sensor
Sensor
Wire to
the C365T11
Check for the following error messages:
No Power Message
nP is displayed when there is
no power to the system. If the
message is displayed when
the system is powered, check
the wiring from the thermostat
to the system for errors.
Sensor Error Message
nS is displayed when there is
an error with the temperature
sensor(s) in the sleeping
area. Check for open wires or
shortages.
When the nS message is
displayed, the thermostat will
continue to control the
system and automatically
opens both dampers and
disables airflow control until
the sensor error is corrected.
Press the touchscreen with your fingertip only,
using a firm touch. Do not use a sharp object such
as a pen or pencil.
T
S
3
Set Time and Day
Touch here to change the
time and day of the week.
AM
NEXT
ENTER
AM
NEXT
ENTER
We
AM
ENTER
4
Sleeping
Airflow %
Cool
Set To
Schedule
Living
Living
Day
Tu
AM
MENU
MODE
Sleeping
Airflow %
Cool
Set To
Schedule
Living
Living
Day
Tu
AM
MENU
MODE
Sleeping
Airflow %
Cool
Set To
Schedule
Living
Living
Day
Tu
AM
MENU
MODE
CHANGE THE HOUR
Touch the UP/DOWN keys to change the
HOUR. Touch NEXT.
CHANGE THE MINUTE
Touch the UP/DOWN keys to change the
MINUTE. Touch NEXT.
CHANGE THE DAY OF THE WEEK
Touch the UP/DOWN keys to change the
DAY OF THE WEEK.
Touch ENTER.
COOL
SYSTEM
AUTO
FAN
COOL
SYSTEM
AUTO
FAN
COOL
SYSTEM
AUTO
FAN
Sayfayı Yazdır